Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

MEA 330B S2 2025 class quiz

Total questions: 53

Worksheet time: 29mins

Name
Class
Date
1.

What type of seat restraint is typically used in GA aircraft?

a)

2-point lap sash belt

b)

5-point belt

c)

3-point lap sash belt

d)

4-point belt

2.

What must be monitored periodically in terms of life jackets?

a)

Expiry date

b)

Test date

c)

Replacement date

d)

Manufacture date

3.

Which ELT transmits encoded aircraft and owner-specific data?

a)

407 MHz beacon

b)

406 MHz beacon

c)

406 kHz beacon

d)

407 kHz beacon

4.

How long should an ELT be operated for during self-test?

a)

Two bursts

b)

One burst (1 second)

c)

3 seconds

d)

Two bursts (1 second)

5.

What doesn’t a nacelle contain?

a)

Skin and cowling

b)

Structural members

c)

Engine mounts

6.

What is the name of the part that covers high-drag areas to increase aerodynamics?

a)

Empennage

b)

Wind-cover

c)

Fairing

d)

Nacelle

7.

What are advantages of wingtips?

a)

Lift, speed, structural support

b)

Inspection access, fuel storage, airflow control

c)

Looks sick

d)

Inspection access, modifications, gravity

8.

Why are modern aircraft designed with rounded contours and fitted with fairings?

a)

To simplify manufacturing and assembly of components

b)

To smooth airflow over rough fittings and attachment points

c)

To reduce aircraft weight by covering external fittings

d)

To improve structural strength at attachment points

9.

What aerodynamic improvements were introduced in early aircraft design to reduce drag?

a)

Fixed undercarriage without fairings to simplify maintenance and reduce weight

b)

Streamlined fuselages, enclosed cockpits, and fairings on undercarriage legs and wheels

c)

Thicker fuselages to increase internal space and reduce turbulence

d)

Open cockpits with reinforced struts to improve pilot visibility

10.

What is the purpose of removable fairings on modern aircraft?

4 lines
11.

To enclose wing root attachment and hinge points, smoothing airflow

a)

To provide additional access panels for faster maintenance

b)

To permanently reinforce wing and control surfaces for added strength

12.

What is the purpose of a thrust reverser during landing?

a)

To redirect thrust backwards

b)

To reduce engine load

c)

To redirect engine thrust forward to stop the aircraft

d)

To provide additional lift during landing

13.

What are interior trim panels made from?

a)

Woven fiberglass mesh

b)

Soft vinyl ester plastics

c)

Hardened carbon fibre

d)

Tempered aluminium sheets

14.

What seats are exclusively used in military aircraft?

a)

Jump seats

b)

Bucket seats

c)

Ejection seats

d)

8-point belted seats

15.

What are three types of doors used on aircraft?

a)

Entry doors, Carpet doors, Access doors

b)

Entry doors, Cargo doors, Access doors

c)

Utility doors, Cargo doors, Entry doors

d)

Aluminium doors, Nickel steel doors, Composite doors

16.

The type of aircraft that primarily utilise unpressurised doors is:

a)

Large commercial jets

b)

Military fighter jets

c)

Light general aviation aircraft

d)

Cargo helicopters

17.

Which of the following is not a type of aircraft?

a)

Military aircraft

b)

GA aircraft

c)

Commercial aircraft

d)

Pressurized aircraft

18.

What is the primary purpose of door and window seals in aircraft?

a)

To support the structural frame of the aircraft

b)

To provide decorative trim around windows and doors

c)

To prevent weather and wind noise from entering the cabin

d)

To regulate the cabin’s pressurisation system independently

19.

Which of the following is not an interior fitting?

a)

Trim panels

b)

Control surfaces

c)

Consoles

d)

Seats

20.

What should you do prior to servicing a military ejection seat?

a)

Sit in the seat and pretend you’re Tom Cruise

b)

Strap yourself in the seat and test the ejection function (pull handles)

c)

Ask your supervisor

d)

Ensure you are qualified

21.

What is located on a passenger console?

a)

Jasper valve

b)

Gasper valve

c)

Casper valve

d)

Gasket valve

22.

What are floor panels made out of in GA aircraft?

a)

Aluminum

b)

Composites

c)

Titanium

d)

ALCAD

23.

Cabin floor coverings must be:

a)

Flame resistant

b)

Water resistant

c)

Thermal shock resistant

d)

Corrosion resistant

24.

What is NOT fitted in a cockpit?

a)

Escape rope

b)

Emergency slide

c)

Portable oxygen bottle

d)

Inertia reel

25.

Emergency slides are inspected every ____ year(s):

a)

2 years

b)

1 year

c)

3 years

d)

4 years

26.

What does the red sash across the entry door of an aircraft mean?

a)

Escape slide is NOT armed

b)

Escape slide is armed

c)

Smoke in cabin

d)

Emergency OPEN ASAP

27.

GA aircraft built after what year are required to have 2 doors, 1 of which must be an emergency exit?

a)

1987

b)

1988

c)

1985

d)

1978

28.

What type of seat restraint is typically used in GA aircraft?

a)

3-point lap sash belt

b)

4-point racing harness

c)

Single shoulder belt

d)

No seat belt

29.

What must be monitored periodically in terms of life jackets?

a)

Test date

b)

Color of the jacket

c)

Brand name

d)

Size label

30.

Which ELT transmits encoded aircraft and owner-specific data?

a)

406 MHz beacon

b)

121.5 MHz beacon

c)

243 MHz beacon

d)

Analog ELT

31.

How long should an ELT be operated for during self-test?

a)

One burst (1 second)

b)

Five minutes

c)

Thirty seconds

d)

Ten bursts (10 seconds)

32.

What doesn’t a nacelle contain?

a)

Batteries

b)

Generator

c)

Gearbox

d)

Main shaft

33.

What is the name of the part that covers high-drag areas to increase aerodynamics?

a)

Fairing

b)

Spoiler

c)

Aileron

d)

Strut

34.

What are advantages of wingtips?

a)

Inspection access, fuel storage, airflow control

b)

Increased engine thrust, reduced drag, higher weight

c)

Improved landing gear strength, reduced noise, increased speed

d)

Enhanced cockpit visibility, reduced maintenance, higher altitude capability

35.

Why are modern aircraft designed with rounded contours and fitted with fairings?

a)

To improve aerodynamics and reduce drag

b)

To increase the weight of the aircraft

c)

To make the aircraft look more attractive

d)

To reduce the cost of manufacturing

36.

What aerodynamic improvements were introduced in early aircraft design to reduce drag?

a)

Streamlined fuselages, enclosed cockpits, and fairings on undercarriage legs and wheels

b)

Open cockpits and exposed engines

c)

Square wings and flat surfaces

d)

Heavy external bracing and wires

37.

What is the purpose of removable fairings on modern aircraft?

a)

To enclose wing root attachment and hinge points, smoothing airflow

b)

To increase the weight of the aircraft for stability

c)

To provide additional fuel storage

d)

To reduce the visibility of the aircraft to radar

38.

What is the purpose of a thrust reverser during landing?

a)

To redirect engine thrust forward to stop the aircraft

b)

To increase the lift of the wings during landing

c)

To reduce the noise produced by the engines

d)

To provide additional fuel to the engines

39.

What are interior trim panels made from?

a)

Soft vinyl ester plastics

b)

Aluminum alloy

c)

Tempered glass

d)

Carbon fiber

40.

What seats are exclusively used in military aircraft?

a)

Ejection seats

b)

Recliner seats

c)

Bench seats

d)

Swivel seats

41.

What are three types of doors used on aircraft?

a)

Entry doors, Cargo doors, Access doors

b)

Sliding doors, Revolving doors, Trap doors

c)

Garage doors, French doors, Pocket doors

d)

Storm doors, Screen doors, Dutch doors

42.

What type of aircraft primarily utilise unpressurised doors?

a)

GA aircraft

b)

Commercial jets

c)

Military bombers

d)

Cargo helicopters

43.

What is the primary purpose of door and window seals in aircraft?

a)

To prevent weather and wind noise from entering the cabin

b)

To increase the weight of the aircraft

c)

To provide additional seating for passengers

d)

To enhance the appearance of the aircraft

44.

Which of the following is not an interior fitting?

a)

Control surfaces

b)

Seats

c)

Cabin lights

d)

Overhead bins

45.

What should you do prior to servicing a military ejection seat?

a)

Ensure you are qualified

b)

Disconnect the aircraft battery

c)

Remove all seat cushions

d)

Release the canopy latch

46.

What is located on a passenger console?

a)

Gasper valve

b)

Altimeter

c)

Throttle lever

d)

Rudder pedal

47.

What are floor panels made out of in GA aircraft?

a)

ALCAD

b)

Wood

c)

Fiberglass

d)

Carbon Fiber

48.

To smooth airflow over rough fittings and attachment points is the purpose of what?

a)

Fairings

b)

Rivets

c)

Bulkheads

d)

Struts

49.

Cabin floor coverings must be:

a)

Flame resistant

b)

Water resistant

c)

Soundproof

d)

Electrically insulated

50.

What is NOT fitted in a cockpit?

a)

Emergency slide

b)

Control yoke

c)

Rudder pedals

d)

Instrument panel

51.

Emergency slides are inspected every ___ year(s):

a)

1 year

b)

2 years

c)

3 years

d)

5 years

52.

What does the red sash across the entry door of an aircraft mean?

a)

Escape slide is armed

b)

Cabin is pressurized

c)

Door is unlocked

d)

Emergency lights are on

53.

GA aircraft built after what year are required to have 2 doors, 1 of which must be an emergency exit?

a)

1988

b)

1987

c)

1978

d)

1985