Fill in the blank: ______ is the Occupational Safety and Health Administration; enforces workplace safety.

Fill in the blank: ______ is an OSHA requirement to prevent hazards.

Fill in the blank: ______ is the legal right to stop work if unsafe.

Fill in the blank: ______ is a source of danger or harm.

Fill in the blank: ______ is a penalty issued for violating OSHA standards.

Fill in the blank: ______ means employers must provide a safe workplace.

Fill in the blank: ______ is the duty to train and protect workers.

Fill in the blank: ______ is the duty to follow rules and report hazards.

Fill in the blank: ______ is the official review of a jobsite by OSHA.

Fill in the blank: ______ are shared values that prioritize safety.

PPE reduces the risk of injury by:

PPE – ________ protecting workers from hazards.

Hard Hat – Protects ________ from falling objects.

Safety Glasses – ________ protection.

Respirator – Protects lungs from ________/fumes.

Steel-Toe Boots – ________ protection.

Fill in the blank: ________ are barriers at edges/openings.

Fill in the blank: ________ is a strap connecting harness to anchor.

Fill in the blank: ________ catches falling workers.

One rule for safe ladder use is:

Caught-In/Between Hazard – Worker ________/crushed by equipment/materials.

Blind Spot – Area operator cannot ________.

Pinch Point – Area where body can be ________.

Material Storage Safety – Rules for ________/storing loads.

One purpose of a GFCI is:

Fill in the blank: Ground Fault is ________ current flow.

Fill in the blank: Overhead Power Line is a hazard from ________ wires above.

Fill in the blank: Insulation is a material preventing ________.

Fill in the blank: Arc Flash is a dangerous release of ________ from fault.

Signs and labels prevent accidents by:

MSDS/SDS – Material Safety Data Sheet/Safety Data ________.

Chemical Hazard – ________ substance.

Pictogram – Graphic symbol on chemical ________.

Flammable – Easily ________.

Toxic – Harmful if inhaled, swallowed, or ________.

Corrosive – Substance that destroys ________/tissue.

Safety Signs – Signs indicating required PPE, hazards, or ________.

Emergency Exit – Clearly marked ________ route.

SDS stands for ________, and it is important because it provides information about the safe handling of chemicals.

Applying everything we’ve learned about safety to our classroom/shop means:

Fill in the blank: ________ is fixing a hazard.

Fill in the blank: ________ is a written notice of a danger.

Fill in the blank: ________ is the underlying reason an accident happens.

Fill in the blank: ________ are steps to stop accidents before they happen.

Fill in the blank: ________ is an incident that almost caused harm.

Fill in the blank: ________ is a written record of an accident/near miss.

Fill in the blank: ________ is responsibility for safety actions.

Fill in the blank: ________ is shared safety habits on the job.

Fill in the blank: ________ is ongoing efforts to improve safety.