wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Health & Safety Mid Point Mock Exam 2365 Lv2

Total questions: 27

Worksheet time: 31mins

Name
Class
Date
1.

What type of sign is shown?

a)

Warning sign

b)

Prohibition sign

c)

Safety condition/information sign

d)

Mandatory sign

2.

What type of sign is shown?

a)

Mandatory sign

b)

Safety condition/information sign

c)

Prohibition sign

d)

Warning sign

3.

On a construction site a safety helmet must be worn by everyone except in which type of situation?

a)

Attending the construction site for less than half an hour

b)

When guard rails and toe boards are fitted to towers

c)

The building work is not over a height of 10m

d)

A team meeting held in a site hut

4.

What type of sign is shown?

a)

Prohibition sign

b)

Mandatory sign

c)

Warning sign

d)

Safety condition/information sign

5.

What electrical document does the British Standard number BS 7671 relate to?

a)

The Health and Safety at Work Act 1974

b)

The IET Wiring Regulations

c)

Personal Protective Equipment at Work Regulation 1992

d)

Guidance Notes 7

6.

When dealing with a fire in an open oil storage tank, which one of the following extinguisher would be most suitable?

a)

Foam

b)

Carbon Dioxide

c)

Water

d)

Fire Blanket

7.

What type of sign is shown?

a)

Mandatory sign

b)

Information sign

c)

Warning sign

d)

Prohibition sign

8.

What are the three elements required for all fires?

a)

Fuel, air and heat

b)

Fuel, heat and oxygen

c)

Heat, air and oxygen

d)

Fuel, heat and paper

9.

Which one of the following is not a requirement for isolation?

a)

Identify sources of supply

b)

Replacing the overcurrent protective device (fuse)

c)

Isolate

d)

Secure isolation

10.

Can you draw a ring main 32Amp Socket circuit with 4 outlets? More marks awarded for the most detail!

11.

What PPE would you use to protect against falling objects?

a)

High visibility clothing

b)

Goggles

c)

Safety helmets

d)

Gauntlets

12.

Which one of the following is NOT a statutory document?

a)

Electricity at Work Regulations 1982

b)

The IET Wiring Regulations

c)

Health and Safety at Work Act 1974

d)

Electricity Safety, Quality and Continuity Regulation 2002

13.

The Health and Safety at Work Act 1974 puts a duty of care upon...

a)

Both employers and employees

b)

Only employers

c)

Only employees

d)

Both employers and the general public

14.

What is the fire extinguisher, which must NOT be used on fires involving live electrical equipment?

a)

Dry Powder

b)

Water

c)

Carbon Dioxide

d)

Vaporising liquid

15.

How should asbestos waste be disposed of?

a)

Swept down the drain

b)

Taken back to the depot and placed in a general site waste skip

c)

Be sealed in suitable containers and labelled correctly

d)

With the general site waste

16.

What does the abbreviation COSHH stand for?

a)

Care of substances hazardous to health

b)

Care of substances helpful to health

c)

Control of substances helpful to health

d)

Control of substances hazardous to health

17.

What is the first action you should take in the event of a colleague receiving an electric shock?

a)

Check your own safety

b)

Ring 999

c)

Go and get help

d)

Isolate the electrical supply

18.

Which of the following are examples of emergency light fittings?

a)

High and low pressure sodium

b)

Maintained and non-maintained

c)

Normally open and normally closed

d)

First and second fix

19.

What treatment would you give to someone that had received burns to the arms?

a)

Remove their clothing and apply warm water over the burnt area

b)

Remove their clothing and apply an antiseptic cream

c)

Pour a steady flow of cold water over the burnt area whilst leaving their clothing on

d)

Remove their clothing and then pour a steady flow of cold water over the burnt area.

20.

Which one of the following fire extinguishers is not suitable for an electrical fire?

a)

Vaporising liquid

b)

Carbon dioxide

c)

Dry Powder

d)

Foam

21.

In which of the following would a respirator be worn?

a)

Paint spraying shop

b)

Fitting shop

c)

Drawing office

d)

Construction site

22.

All safety equipment in the workplace must be regularly inspected by…

a)

Individual employees

b)

The employer or their appointed representative

c)

The local council

d)

An outside inspecting body

23.

A machine is working and then stops the correct procedure is to…

a)

Tap the machine with a hammer to see if it starts working

b)

Isolate the power and call a supervisor

c)

Sound the alarm and get help as soon as possible

d)

Call the supervisor and keep others away from the area

24.

A person is lying on the floor after receiving an electric shock the immediate action to take is to…

a)

Check for broken bones and cuts

b)

Check for damage to the head

c)

Check for breathing and a pulse

d)

Check the supply is isolated

25.

An electrician working by the side of the road has on hardhat and safety boots what else should he have?

a)

Safety harness

b)

Clean air supply

c)

High visibility clothing

d)

Warehouse coat

26.

What does BS in BS 7671 stand for?

(a)  

27.

Can you draw a light ceiling rose with all components within it? More points for the most detail included!