Font size
WorksheetsCh 2 Semester 1 Exam Review
Total questions: 93
Worksheet time: 47mins
Numbers are usually written so that the uncertainty is in the last reported digit.
True
False
The decimal number 0.0000010 expressed in scientific notation is 1.0 × 10^6.
True
False
The decimal number 0.0210 expressed in scientific notation is 2.10 × 10^-2.
True
False
The mass of an object, 4.55 × 10^-3 g, expressed in decimal notation is 0.000455 g.
True
False
If you count 7 pennies, you can only report one significant figure in that measurement.
True
False
Exact numbers have an unlimited number of significant figures.
True
False
Zeros located between two numbers are not significant.
True
False
Zeros located after a number and after a decimal point are significant.
True
False
Trailing zeros at the end of a number, but before an implied decimal point, are ambiguous.
True
False
Trailing zeros before a decimal point but after a non-zero number are considered significant figures.
True
False
The number 0.010100 has five significant figures.
True
False
The number 4,450,000.0 has 3 significant figures.
True
False
The number 7.20 × 10^3 contains three significant figures.
True
False
When the temperature of an object is reported as 23.7°C, the actual temperature can be assumed to be between 23.6°C and 23.8°C.
True
False
Scientific numbers are reported so that every digit is certain except the last, which is estimated.
True
False
When the number 65.59 is rounded to contain 2 significant figures, it becomes 66.0.
True
False
When the number 2.35 is rounded to contain 2 significant figures it becomes 2.4.
True
False
In multiplication and division calculations, the answer will have the same number of decimal places as the number carrying the fewest decimal places.
True
False
In multiplication or division calculations, the answer will have the same number of decimal places as the number carrying the most decimal places.
True
False
In addition or subtraction, the result carries the same number of decimal places as the quantity carrying the fewest decimal places.
True
False
The mass of an object depends on gravity.
True
False
The base unit of length in the SI system is the cm.
True
False
The base unit of mass in the SI system is the kg.
True
False
The prefix nano represents the multiplier 0.000000001.
True
False
The prefix micro represents the multiplier 0.001.
True
False
A nine gigagram mass is heavier than a nine nanogram mass.
True
False
The prefix in the name of a polygon indicates how many sides this geometric figure has, so a "decagon" would have ten sides.
True
False
There are 1000 kilometers in one meter.
True
False
You do not need to write units in calculations as long as you can remember them.
True
False
Conversion factors are constructed from any two quantities known to be equivalent.
True
False
A conversion factor is a fraction with one unit on top and a different unit on the bottom.
True
False
A solution map diagrams the steps required to get from the starting point to the end point of a calculation problem.
True
False
A solution map is the section near the back of the textbook that provides the answers to assigned problems.
True
False
One mile measures 5,280 feet long, so one square mile is equivalent to 5,280 square feet.
True
False
Given that 1 inch equals 2.54 centimeters, then 1 cubic inch equals 16.387 cubic centimeters.
True
False
All solids have the same density.
True
False
Suppose a symmetrical metal rod of the element lead has a density of 11.4 g/cm^3. If this rod is cut in half, the density of each piece is now 5.7
True
False
If you are given the mass and density of an object, you can calculate the volume by using the equation: V = m/d.
True
False
If you know the density of a liquid and its volume, the mass of the liquid may be calculated using the equation: m = V/d.
True
False
The density of iron is 7.86 g/cm³ while the density of lead is 11.4 g/cm³. If you had one cm³ of each metal, the piece of iron would have a greater mass.
True
False
The correct scientific notation for the number 0.00050210 is:
5.0210 × 10⁴
5.021 × 10⁻⁴
5.021 × 10⁴
5.0210 × 10⁻⁴
none of the above
The correct scientific notation for the number 500.0 is:
5 × 10²
5.00 × 10²
5.000 × 10²
5 × 10⁻²
none of the above
The distance between the two hydrogen atoms in a molecule of water is 0.000000000172 m. Express this distance in scientific notation.
1.72 × 10⁻⁹ m
1.72 × 10⁻¹⁰ m
0.172 × 10⁻¹⁰ m
17.2 × 10⁹ m
1.72 × 10¹⁰ m
The wavelength of blue light is 0.00000045 m. Express this wavelength in scientific notation.
4.5 × 10⁻⁶ m
4.5 × 10⁶ m
4.5 × 10⁻⁷ m
4.5 × 10⁷ m
0.45 × 10⁻⁷ m
The correct decimal representation of 1.201 × 10⁻⁷ is:
12010000
0.001201
0.0000001201
1201.000
none of the above
The correct decimal representation of 6.453 × 10³ is:
6,453
0.006453
6.5 × 10³
6.453
none of the above
Suppose a thermometer has marks at every one degree increment and the mercury level on the thermometer is exactly between the 25 and 26 degree Celsius marks. We should properly report the temperature measurement as:
25°C
26°C
25.5°C
25.50°C
25.55°C
In the number 48.93, which digit is estimated?
4
8
9
3
None of the above, all digits are certain.
There are exactly 2.54 centimeters in 1 inch. When using this conversion factor, how many significant figures are you limited to?
1
3
ambiguous
depends on if you are using it in multiplication/division or addition/subtraction
infinite number of significant figures
The correct number of significant figures in the number 865,000 is:
3
6
4
ambiguous
none of the above
The correct number of significant figures in the number 1.250100 is:
A) 5
B) 7
C) 4
D) ambiguous
E) none of the above
The correct number of significant figures in the number 0.027090 is:
7
6
5
ambiguous
none of the above
The correct number of significant figures in the number 9.080 × 10^4 is:
3
4
5
ambiguous
none of the above
The correct number of significant figures in the number 4.0×10−2 is:
1
2
3
ambiguous
none of the above
The correct number of significant figures in the number 0.002320 is:
7
4
3
ambiguous
none of the above
Which of the following statements is NOT part of the rules for determining significant figures?
Non-zero digits at the end of a number are not significant.
Zeroes between two numbers are significant.
Zeroes to the left of the first non-zero number are not significant.
Trailing zeroes at the end of a number, but before an implied decimal point are ambiguous.
All of the above statements are part of the rules.
When the value 4.449 is rounded to two significant figures, the number should be reported as:
4.4
4.5
4.44
4.45
none of the above
How many significant digits should be reported in the answer to the following calculation? (4.3 - 3.7) × 12.3 =
1
2
3
4
none of the above
The correct prefix for the multiplier 1,000,000 is:
mega.
milli.
micro.
nano.
none of the above
The correct prefix for the multiplier 1,000 is:
mega.
milli.
micro.
nano.
none of the above
The correct prefix for the multiplier 0.1 is:
tera.
deci.
femto.
pico.
none of the above
The correct prefix for the multiplier 0.000001 is:
mega.
milli.
micro.
nano.
none of the above
The correct prefix for the multiplier 100 is:
mega.
hecto.
centi.
nano.
none of the above
The correct prefix for the multiplier 10 is:
deca.
deci.
tera.
centi.
none of the above
The correct prefix for the multiplier 1,000,000,000 is:
mega.
milli.
tera.
giga.
none of the above
The correct multiplier for the prefix pico is:
10-3
10-6
10-9
10-12
none of the above
The correct multiplier for the prefix femto is:
10-15
10-12
1012
109
none of the above
The correct multiplier for the prefix milli is:
10-3
10-6
10-9
10-12
none of the above
The correct multiplier for the prefix micro is:
103
10-6
10-9
106
none of the above
What is the base SI unit for length?
mile
centimeter
foot
meter
none of the above
What is the base SI unit for mass?
kilogram
gram
pound
ton
none of the above
The base SI unit for temperature is:
Fahrenheit.
Kelvin.
Celsius.
atmospheres.
none of the above
Which measurement below represents the heaviest mass?
1 mg
1 kg
1 pg
1 Mg
1 dg
Which of the following sets of units is NOT in the order of increasing size?
μg < g < kg
mL < dL < L
ns < ms < s
cm < μm < km
μmol < mmol < mol
An American nickel five cent coin has a mass of approximately 5 grams. Five grams is equivalent to which term?
5000 kilograms
5000 milligrams
50 centigrams
5000 micrograms
none of the above
Which of the following would NOT be considered a correct conversion factor?
1 dozen eggs = 12 eggs
12 eggs = 1 dozen eggs
1 pair of shoes = 1 shoe
100 pennies = 1 dollar
5 cents = 1 nickel
The common English unit in which the speed of an automobile is expressed is miles/hr. What is the set of base SI units for speed?
mile/s
km/hr
km/s
m/s
none of the above
The typical problem-solving procedure involves four steps in the order:
sort, strategize, solve, check.
strategize, solve, sort, check.
check, strategize, sort, solve.
solve, sort, check, strategize.
How many inches are in 25.8 cm?
0.10
28.3
0.0984
10.2
none of the above
How many inches are in 2.80 ft?
34
33.6
0.233
4.29
none of the above
How many grams are in 1.48×107μg ?
1.48 × 103
1.48 × 10^13
1.48
14.8
none of the above
How many milliliters are in 17.5 L?
175
1.75×10−2
1.75×103
1.75×104
none of the above
How many microliters are in 41.0 mL?
4.1 × 10^3
4.1×1010
0.041
4.10×104
none of the above
How many liters are in 333 mL?
3.33×105
0.333
33.3
3.33
none of the above
How many low dose 81 mg aspirin tablets can be made from 1.21 kg of aspirin?
1.5 × 10^3 tablets
1.5 × 10^4 tablets
1.5 × 10^5 tablets
1.21 × 10^3 tablets
1.21 × 10^4 tablets
A 12-oz can of soda pop costs eighty-nine cents. A 2.00 L bottle of the same variety of soda pop costs $2.29. How many times more expensive it is to buy the 12-oz can of pop compared to buying it in a 2.00 L bottle?
1.9
2.2
2.6
2.8
4.2
How many cm^3 are there in 2.5m3 ?
2.5×106
2.5×10−2
2.5×102
2.5×10−6
none of the above
How many cm^3 are there in 1.25ft3 ?
38.1
5.49×103
246
3.54×104
none of the above
A room has dimensions of 10.0 ft × 20.0 ft × 8.00 ft. Given that there are three feet in a yard, what is the volume of the room in yd^3?
178
59.3
1.60 × 10^3
533
none of the above
What is the volume of a cube with dimensions 11.0 cm × 11.0 cm × 11.0 cm in m^3?
1.331 × 10^-3
1.33×103
1.33×10−3
1.3×103
none of the above
Which term below is equivalent to one milliliter?
1 cc
1 mL
1 cm^3
A plastic block has dimensions of 2.2 cm × 3.0 cm × 1.5 cm and a mass of 12.4 grams. Will the block float in water and why?
Yes, because the density of the block is 1.3 g/mL which is less than the density of water.
Yes, because the density of the block is 0.80 g/mL which is less than the density of water.
No, because the density of the block is 1.3 g/mL which is greater than the density of water.
No, because the density of the block is 0.80 g/mL which is greater than the density of water.
none of the above
Suppose a boat engine leaks 938 milliliters of oil into a lake. The mass of this spilled oil is 823 grams. The oil will not mix with the lake water. Which statement is true?
The oil will sink because its density of 0.877 g/mL is greater than the density of water.
The oil will float because its density of 0.877 g/mL is less than the density of water.
The oil will sink because its density of 1.14 g/mL is greater than the density of water.
The oil will float because its density of 1.14 g/mL is less than the density of water.
none of the above
