Worksheets📝 [MP] QB ID 020603 ❚ Practice Problems 01
Total questions: 100
Worksheet time: 50mins
Name
Class
Date
1.
The birth of the plumbing profession in the Philippines was traced back to.
a)
12th century
b)
15th century
c)
16th century
d)
17th century
2.
Based on the history of plumbing practice“ The walled city” known as Intramuros was established as a model community by the?
a)
Americans
b)
Spaniards
c)
Mexican
d)
Japanese
3.
When was the first approved which inclusion of “asbestos cement pipe” as an approved material.
a)
November 28, 1967
b)
September 21, 1988
c)
October 23, 1986
d)
November 21, 1985
4.
The Filipino plumbers were assigned the task of maintaining, repairing/remodeling plumbing system in all pueblos or town, church and government buildings during?
a)
16th -17th century
b)
18th -19th century
c)
19th -20th century
d)
15th -16th century
5.
Based on the history of plumbing practice, plumbing took a great leap at the turn of the American soldiers, engineers, Thomasite teachers, doctors and evangelist?
a)
16th century
b)
20th century
c)
19th century
d)
18th century
6.
Before Martial Law, Republic Act No. 6541known as the?
a)
Building Code of the Philippines
b)
Fire Code of the Philippines
c)
Sanitation Code of the Philippines
d)
Plumbing Code of the Philippines
7.
Based on the history of plumbing practice, who was the Governor General issued letter of instruction on proper waste disposal when epidemics like cholera, leprosy and other contagious disease engulfed in the Philippines.
a)
General Fortunato
b)
General Mc. Arthur
c)
General Malvar
d)
General Harrison
8.
The first chief of the Division of the Plumbing Construction and Inspection.
a)
John M. David
b)
John F. Hass
c)
John A. Meracolo
d)
John F. Hidalgo
9.
Who was the NAMPAP President spearheaded the updating of the RNPCP in 1996?
a)
Jamie M. Cabase
b)
Hemogenes Pobre
c)
Fortunato H. Amosco
d)
Teodoro pastor.
10.
When was the NAMPAP organized and had it registered with the Securities and Exchange Commission.
a)
1934
b)
1932
c)
1935
d)
1937
11.
Known as “Plumbing Law of the Philippines” was signed by President Ramon Magsaysay in June 18, 1955.
a)
R.A 1374
b)
R.A 1378
c)
R.A 1060
d)
R.A 9514
12.
When was the National Plumbing Code of the Philippines promulgated and approved by Malacañang?
a)
June 18, 1955
b)
December 21, 1999
c)
January 28 , 1959
d)
February 14, 1959
13.
When was the Board of Examiners for Master Plumber and NAMPAP prepared the Curriculum for Plumbing Engineering and approved by DepED at Feati University?
a)
1966-1988
b)
1966-1969
c)
1955-1999
d)
1945-1965
14.
Plumbing Engineering was first introduced to what School or University?
a)
Feati University
b)
University of the Philippines
c)
De LaSalle University
d)
University of Manila
15.
City Ordinance No. 2411 known as the?
a)
National Drinking Water Standard
b)
Clean Air Act
c)
Plumbing Code for the City of Manila
d)
Clean Water Act
16.
Who is the Chairman of Board of Master Plumbers (BOMP) where the NAMPAP submitted he draft code to him in October 1999.
a)
Engr. John Jones
b)
Engr. Fortunato H. Amosco
c)
Engr. Raymundo Gumapac
d)
Engr. Catalino Casapunan
17.
Who is the Chairman of PRC where adopted RNPCP 1999 which Pres. Joseph Estrada approved last Dec. 21, 1999.
a)
Hermogenes Pobre
b)
Teodoro Pastor
c)
Roberto Feliciano
d)
Raymondo Reyes
18.
RNPC 1999 was approved by Pres. Joseph Estrada last_________.
a)
June 27, 1956
b)
April 19, 1958
c)
December 21, 1999
d)
July 25, 1999
19.
An adequate _______ is one of the most important governances in modern and healthful human existence.
a)
Fire Code
b)
Plumbing Code
c)
Sanitation Code
d)
Water Code
20.
How many set of plan shall be submitted of the aforementioned requirements with each application for a permit signed and sealed by RMP?
a)
5 sets
b)
4 sets
c)
6 sets
d)
6 sets
21.
How many set(s) of approved plumbing plan, data and specification will retain by the Administrative Authority.
a)
2 sets
b)
1 set
c)
3 sets
d)
4 sets
22.
How many set(s) of approved plumbing plan, specification and data will retain to applicant and owner?
a)
2 sets
b)
3 sets
c)
4 sets
d)
1 set
23.
How many set(s) of plan shall be kept or retain to a jobsite at all times while the work is in progress.
a)
3 sets
b)
2 sets
c)
1 set
d)
4 sets
24.
A plumbing permit issued shall expire and become null and void if the plumbing work authorized therein is not commenced within _____ from the date issued.
a)
Two years
b)
One year
c)
Six months
d)
1-1/2 months
25.
If the plumbing work is suspended or abandoned at any time after having been commenced for a period of ______?
a)
120 days
b)
180 days
c)
60 days
d)
90 days
26.
In case of renewal of a plumbing permit from the sanction due to expired permit what will be the equivalent fee shall be paid?
a)
Whole original amount
b)
¼ of original amount
c)
½ of original amount
d)
¾ of the original amount
27.
Where shall be a registration number in a round shaped seal placed?
a)
Upper portion of the round seal.
b)
Center below the name.
c)
Upper center of the round seal.
d)
Lower portion of the seal.
28.
Where shall be the word “Registered and Licensed Master Plumber” in a round shaped seal placed?
a)
Upper portion of the round.
b)
Center of the round seal.
c)
Upper center of the round seal.
d)
Lower portion of the seal.
29.
Where shall be the name of Registered and Licensed Master Plumber in a round shaped seal placed?
a)
Upper portion of the round seal
b)
Center of the round seal
c)
Upper center of the round seal
d)
Lower portion of the seal
30.
An organization primarily established for purposes of testing to approved standards.
a)
Administrative Authority
b)
Approved Testing Agency
c)
Authority Having Jurisdiction
d)
Plumbing Official
31.
It includes the Building official, the Commission, the Board where can established and authorize to administer and enforce the provision of R.A 1378.
a)
Administrative Authority
b)
Plumbing Official
c)
Approved Testing Agency
d)
All of the above
32.
The flow of water or other liquids, mixtures or substances into the distributing pipes of a potable water supply from any source other than from its intended source.
a)
Back siphonage
b)
Back pressure
c)
Backflow
d)
Backflow connection
33.
Occurs due to an increased reverse pressure above the supply pressure. Ex: pumps, boilers, gravity or other source of pressure.
a)
Backflow preventer
b)
Backpressure Backflow
c)
Back siphonage
d)
Backflow connection
34.
The flowing back of used, contaminated or polluted water from a plumbing fixture or vessel into a water supply pipe due to negative pressure in such pipe.
a)
Back-siphonage
b)
Back pressure
c)
Back preventer
d)
Cross connection
35.
Any joint obtained by joining of metal parts which alloys will melts at a temp. higher than 449 degree centigrade but lower than the melting temp of the parts to be joined.
a)
Soldered joint
b)
Butt joint
c)
Brazed joint
d)
Mechanical joint
36.
A group vent pipe which starts in front of the extreme fixture connection on a horizontal branch and connects to the vent stack. (See Loop vent)
a)
Common vent
b)
Circuit vent
c)
Local vent
d)
Relief vent
37.
The part of a plumbing system designed and installed to serve more than one appliance, fixture, building or system.
a)
Common
b)
Supply
c)
Chase
d)
Interconnection
38.
A room or space having a volume less than 1.4 cu.m with 250 kCal of the aggregate input rating of all fuel burning appliances installed in that space.
a)
Open space
b)
Conditioned Room
c)
Confined space
d)
Isolated space
39.
An impairment of the quality of the potable water which creates an actual hazard to the public through poisoning or spread of disease by sewage, industrial waste also defined as high hazard.
a)
Pollution
b)
Contamination
c)
Disease
d)
Black water
40.
A vertical vent that is a continuation of a drain to which the vent connects. to
a)
Continuous vent
b)
VSTR
c)
STVR
d)
Main vent
41.
A drain connecting the compartments of a set of fixtures to a trap connecting other permitted fixtures to a common trap.
a)
Continuous vent
b)
Waste branch
c)
Continuous waste
d)
Soil stack
42.
Marking on a backflow prevention device or a vacuum breaker is a point conforming to approved standards and establish by the testing laboratory.
a)
Marker
b)
Critical level
c)
Flood level
d)
Flood level rim
43.
Any connection or arrangement , physical or otherwise, between a potable water supply system and any plumbing fixture which enables nonpotable, used, unclean, polluted contaminated to enter into any part of a potable water system under any condition.
a)
Cross connection
b)
Backflow
c)
Back siphonage
d)
Backpressure
44.
The liquid or water-borne waste derived from the ordinary living processes, free from industrial
a)
waste and of such character that permit satisfactory disposal without special treatment.
b)
Sewer
c)
Storm sewer
d)
Domestic Sewage
45.
Domestic Sewe
a)
A pipe fitting with adjacent reverse bends and shape like the letter “S”.
b)
S-trap
c)
Double bend fitting
d)
Double offset
46.
All the above
a)
Two offsets in successions or in series such that the centerline of the outside ends are in the same straight line.
b)
Double offset
c)
Double bent fitting
d)
S-trap offset
47.
All of the above
a)
A pipe which carries ground and surface water, storm water or waste water into the building drainage system.
b)
Sewer
c)
Sewage
d)
Drain
48.
Conductor
a)
The water supply pipe between the fixture supply pipe and the water distributing pipe.
b)
Fixture supply
c)
Fixtures branch
d)
Distribution pipe
49.
Water service pipe
a)
The drain pipes from the trap of a fixture to the junction of that drain with any other drain pipe. A. Fixture drain
b)
B. Waste branch
c)
C. Soil branch
d)
D. Fixture unit
50.
A water supply pipe connecting the fixture with the fixture branch.
a)
Fixture branch
b)
Distribution pipe
c)
Fixture supply
d)
Crossmain loop
51.
The level in a fixture at which water begins to overflow over the top rim of the fixture.
a)
Flood level rim
b)
Flood level
c)
Rim
d)
Flooded
52.
Is the top edge of a receptacle from where water overflows.
a)
Flood level rim
b)
Flood level
c)
Flooded
d)
Air Gap
53.
A fixture is flooded when the liquid therein risers to the flood level rim.
a)
Flood level rim
b)
Flood level
c)
Flooded
d)
Rim
54.
A tank located above or integral with water closet, urinal or similar fixture for flushing or removing excrement in the fixture.
a)
Flush valve
b)
Flush tank
c)
Flushometer valve
d)
Flushometer tank
55.
Is a device located at the bottom of the tank for the purposed of flushing water closet and similar fixtures.
a)
Flush valve
b)
Flush tank
c)
Flushometer valve
d)
Flushometer tank
56.
Is integrated within an air accumulator vessel which is design to discharge a predetermine a quantity of water into fixture for flushing purposes.
a)
Flushometer valve
b)
Flush valve
c)
Flushometer tank
d)
Flush tank
57.
Is a device which discharges a predetermined quantity of water into fixtures for flushing purposes and is actuated by direct water pressure.
a)
Flushometer tank
b)
Flushometer valve
c)
Flush valve
d)
Flush tank
58.
A return bend of small- sized pipe, one end of which is about 30 cm. long and other end is about 7.5 cm long. Commonly used as a faucet for a pantry sink.
a)
Gooseneck
b)
Elbow 45 deg
c)
Elbow 90 deg
d)
Return bend pipe
59.
An interceptor of at least 3 cu.m capacity to serve or more fixtures and which is remotely located.
a)
Sump
b)
Pit
c)
Grease interceptor
d)
Receptor
60.
The water that stands or passes through the ground.
a)
Natural water
b)
Ground water
c)
Surface water
d)
Rainwater
61.
A branch vent that performs its function for two (2) or more traps.
a)
Group vent
b)
Yoke vent
c)
Utility vent
d)
Circuit vent
62.
Is any pipe or fitting installed in a horizontal positioned or which forms at an angle not more than 45 deg. with the horizontal.
a)
Vertical pipe
b)
Stack
c)
Horizontal pipe
d)
Riser
63.
Any pipe or fitting installed in a vertical positioned or which forms at an angle of not more than 45 degrees with the vertical line.
a)
Horizontal pipe
b)
Stack
c)
Vertical pipe
d)
Branch
64.
Are cast iron soil pipes with plain ends connected together with bolted stainless steel band and neoprene gasket.
a)
Bell pipes
b)
Hubless pipes
c)
Flanged joint
d)
Brazed joint
65.
Is a pipe does not connect directly with the drainage system but conveys liquid waste by discharging into a plumbing fixture and directly connected to the drainage system.
a)
Storm drainage pipe
b)
Sanitary drainage pipe
c)
Indirect waste pipe
d)
Direct waste pipe
66.
Is a device designed and installed to separate and retain deleterious, hazardous or undesirable matters from normal sewage or liquid waste to discharge into the disposal terminal by gravity.
a)
Separator
b)
Filter
c)
Interceptor
d)
All the above
67.
In plumbing, a secondary pipeline. In sewerage, a common sewer to which no other branch sewer is connected. It receives sewage from building sewer service connection only.
a)
Latrine
b)
Lateral
c)
Invert
d)
Primary branch
68.
Is the discharge from any fixture, appliances or appurtenance in connection with a plumbing system which does not receive fecal matter.
a)
Waste pipe
b)
Waste discharge
c)
Liquid waste
d)
Solid waste
69.
A Pipe or shaft to convey foul air from a plumbing fixture or a room to the outer air.
a)
Main vent
b)
Group vent
c)
Local vent
d)
Circuit
70.
Any system of continuous piping, which is the principal artery of the system where branches are connected.
a)
Soil pipe
b)
Main
c)
Waste pipe
d)
Drainage system
71.
The purposed for which a building is used or intended to be used.
a)
Commercial
b)
Maintenance
c)
Occupancy
d)
Building Management
72.
In a line of piping is a combination of elbow or bends, which brings one section of the pipe out of line but into a line parallel with original section.
a)
Parallel
b)
Vertical
c)
Offset
d)
Double offset
73.
Whenever any work regulated by this Code is dangerous to human life or detrimental to health and property and inadequate or unsafe supply and or sewage disposal system.
a)
Nuisance
b)
Disturbance
c)
Pollutants
d)
Reluctant
74.
Tube made of plastic material and colored black. The cross-sectional shape is normally oval and is denoted by its outside diameter.
a)
PE
b)
Copper
c)
PB( Polybutylene)
d)
PEX
75.
Tube made of plastic material and colored black. The cross sectional shape is circular is denoted by its outside diameter or O.D.
a)
PB
b)
Copper
c)
PE (Polyethylene)
d)
Double offset
76.
Any one of special class of device or equipment or intended to perform a special plumbing function, such as motors, heating elements and pressure- temperature elements.
a)
Plumbing appurtenance
b)
Plumbing appliance
c)
Plumbing fixtures
d)
All of the above.
77.
A manufactured device or prefabricated assembly or an on the job assembly of component parts, and serves as adjust to the basic piping system and plumbing fixtures.
a)
Plumbing fixtures
b)
Plumbing appliance
c)
Plumbing appurtenance
d)
All the above
78.
An approved type installed receptacles, devices or appliances supplied with water or receive liquid or liquid borne waste and discharge such waste into the drainage system.
a)
Plumbing appliance
b)
Plumbing appurtenance
c)
Plumbing fixtures
d)
Plumbing system
79.
The administrative authority or the officer with the administration and enforcement of the NPC or his regularly authorized authority.
a)
Person
b)
Plumbing official
c)
Administrative authority
d)
Having jurisdiction
80.
An impairment of the quality of a water to a degree which creates hazard to the public health and adversely affect the aesthetic and potable qualities of water for domestic used.
a)
Contamination
b)
Non potable
c)
Pollution
d)
Waste water
81.
Water satisfactory for drinking, culinary and domestic purposes and meets the requirement of the Philippine national standard for drinking water.
a)
Potability
b)
Purified water
c)
Potable water
d)
Clear water
82.
The normal force exerted by a homogeneous liquid or gas, per unit of area on the wall of the container.
a)
Static head
b)
Pressure
c)
Energy
d)
Isolated space
83.
The pressure existing without any flow motion.
a)
Critical pressure
b)
Normal pressure
c)
Static pressure
d)
Static head
84.
The pressure available at the fixture or water outlet ; allowance is made for pressure drop due to friction loss, head, meter and other losses in the system during maximum demand period.
a)
Static pressure
b)
Normal pressure
c)
Residual pressure
d)
Critical pressure
85.
Is the single sloping drain from the base of a stack to its junction with the main building drain.
a)
Secondary branch
b)
Primary branch
c)
Building drain
d)
Branches
86.
A building sewer, which receive the discharge from more than one building and conveys it to a public sewer, private sewage disposal system or other point of disposal.
a)
Public sewer
b)
Public used
c)
Private sewer
d)
Private used
87.
An outhouse or structure used for the deposition of excrement.
a)
Septic tank
b)
Cesspool
c)
Privy
d)
Seepage pit
88.
A pit beneath a privy where excrement connects.
a)
Distribution box
b)
Privy vault
c)
Sump
d)
Seepage pit
89.
A common sewer directly controlled by public authority to which all abutters have equal right of connection.
a)
Private sewer
b)
Drainage
c)
Public sewer
d)
Main sewer
90.
Potable water piping color coded pipe.
a)
Red
b)
Gray
c)
Blue
d)
Orange
91.
Drainpipes manufactured with toxic components and are color coded of?
a)
Gray, blue and green
b)
Gray, orange and brown
c)
Orange, gray and white
d)
Brown, green and yellow
92.
An approved plumbing fixtures or device of such materials, shape and capacity to adequately receive the discharge from indirect waste pipe, constructed and located to be readily cleaned.
a)
Floor drain
b)
Area drain
c)
Receptor
d)
Pit
93.
Include all valves controls used in plumbing system which are accessible.
a)
Accessories
b)
Equipment
c)
Regulating equipment
d)
Controls
94.
Made up of two 90⁰ bends with inside and outside threads, flanged or welded fittings; and applied also to a or 180⁰ bends in copper tubings.
a)
Offset
b)
Return bend
c)
Double offset bend
d)
U shaped
95.
Waste water containing human excrement and liquid household waste. Also called “ domestic sewage”.
a)
Sanitary Sewer
b)
Storm sewer
c)
Sanitary sewage
d)
Black water
96.
A sewer intended to receive sanitary sewage with or without industrial waste and without the admixture of rain or ground water.
a)
Domestic sewage
b)
Sanitary sewer
c)
Building sewer
d)
Storm sewer
97.
A loosely line excavation in the ground, which receives the discharge of a septic tank.
a)
Septic tank
b)
Cesspool
c)
Privy
d)
Seepage pit
98.
The pipe from the street water main or other source of water supply to the building served.
a)
Main sewer pipe
b)
Distribution pipe
c)
Service pipe
d)
Fixture supply pipe
99.
Any waste water containing animal or vegetable matter in suspension or solution and may include liquids containing chemicals in solution.
a)
Black Water
b)
Sewage
c)
Potable water
d)
Storm water
100.
A vertical opening through a building for elevators, dumbwaiters, light, ventilation or similar purposes.
a)
Septic tank
b)
Conduit
c)
Pipe
d)
Shaft
100 %
