H&S RULES AND PROCEDURES

Open Ended

What are some possible consequences if workshop rules and procedures are not followed?

Multiple Choice

Which of the following is NOT a basic workshop rule?

• Never run or smoke in the workshop

• Wear appropriate clothing

• Leave tools and work area untidy

• Use correct tools and tool safety guards

Open Ended

Why is it important to keep the work area clean and hazard-free?

Multiple Choice

Which of the following statements about walkways in a workshop is correct?

• Walkways can be blocked temporarily if needed.

• Emergency exits must be clearly marked and kept clear at all times.

• Walkways should be used for storage.

• Obstructions in walkways are acceptable during busy hours.

Multiple Select

Select all correct practices for handling waste material in a workshop.

• Place waste in designated metal containers

• Allow rubbish to accumulate

• Dispose of waste according to regulations

• Mix hazardous and non-hazardous waste

Fill in the Blanks

Hazardous waste such as batteries and oil must be stored in

areas or containers.

Open Ended

Describe the steps you should take if a spill occurs in the workshop.

Multiple Choice

Why is it important to keep the lids of containers securely closed when not in use?

• To prevent spills and contamination

• To save storage space

• To make containers look tidy

• To avoid losing the container lid

Multiple Select

Which of the following are correct procedures for handling oily rags in the workplace?

• Place oily rags in metal containers with lids

• Dispose of oily rags regularly

• Leave oily rags on the floor

• Store oily rags in plastic bags

Open Ended

How can maintaining personal hygiene help reduce health risks in a workshop environment?

Multiple Choice

What is one essential feature that every hand washing facility in a workshop must have?

• A plug and hot and cold water

• A mirror above the sink

• A towel rack only

• A clock on the wall

Fill in the Blanks

The locker area must be kept

and tidy.

Open Ended

Describe the importance of proper workshop lighting and how it can impact safety and productivity.

Multiple Choice

Why is local ventilation particularly important in areas where welding, battery charging, engine running, or paint spraying is carried out?

• To remove hazardous fumes and maintain air quality

• To keep the area warm

• To reduce noise levels

• To increase lighting

Multiple Select

Which of the following are proper practices for handling hand tools in a workshop?

• Clean tools after use

• Return tools to designated storage

• Report faulty tools to management

• Leave tools on the workbench

Fill in the Blanks

Fire extinguishers are subjected to an annual

check.

Multiple Choice

What is the purpose of keeping a record of first aid items and their 'use before' dates?

• To ensure items are replaced before they expire

• To track employee attendance

• To monitor cleaning schedules

• To record accident details

Multiple Choice

Which of the following is NOT a requirement for workshop machinery safety?

• Keep the area clean and tidy

• Ensure warning signs and PPE are in place

• Remove all guards from machinery

• Check that isolating switches operate correctly

Fill in the Blanks

All information and warning

must be in place when using air lines and air tools.

Multiple Choice

Which of the following is NOT a correct safety procedure for handling air lines and air tools?

• Store air lines as specified when not in use.

• Check air lines for damage that may restrict flow or cause a leak.

• Use air tools even if they are visibly damaged.

• Report faulty and broken air tools or lines to management.

Fill in the Blanks

Equipment must be fitted with a correctly rated

.

Multiple Choice

What should you do if you find a power tool with damaged insulation on its cable?

• Continue using it until it stops working.

• Report it to management immediately.

• Wrap it with tape and keep using it.

• Ignore the damage if the tool still works.

Open Ended

Reflect on what you learned about workshop safety rules. Is there any rule or procedure you would like to know more about or have questions on?

Multiple Choice

What is one important reason for following rules and procedures in a workshop?

• To keep everyone in the shop safe

• To finish work faster

• To impress supervisors

• To avoid using tools

Open Ended

Why is it important to follow rules and procedures when working in a workshop?