WorksheetsElectricity & Magnetism
Total questions: 95
Worksheet time: 1hrs 26mins
If the battery produced 12.6 Volts and what would be the current flow be for a 6 Ohm resistor
Current=Voltage ÷ resistance
2.1 Amps
2.4 Amps
1.71 Amps
15 Amps
What voltage is needed to cause a 2A current flow through a 10Ω resistor?
Voltage = current x resistance
5V
0.2V
20V
200V
What is the resistance of a 20V bulb with 5A through it?
4 V
100V
4 Ω
100 Ω
What is the current through a 99V bulb with a resistance of 11 Ω?
current = voltage ÷ resistance
9W
9A
60V
60A
Why does the following circuit not work?
The light bulb is broken
The switch is closed
The wood block is an insulator
The battery is dead
The circuit does not work, what could you do to allow the circuit to work?
Add another light
Add another battery
Open the switch
Remove the wood block and connect the wires
Which lights would turn on if your closed switches 1 and 2?
red, blue, and white
red and white
red and blue
blue, white, yellow
The light bulb does not turn on, which statement explains why it is not working?
The battery is dead
The light bulb is broken
The bell is taking all of the energy
The light bulb is not part of a complete circuit
Does energy flow through an open or closed switch?
open switch
closed switch
both open and closed
neither
To complete the circuit, a wire should be placed from —
what is this symbol for?
light bulb
cell
battery (2 batteries)
resistor
What is the major difference between static electricity and current electricity?
Current electricity involves a continuous flow of elecrons; static electricity is a sudden transfer of protons
Current electricity can be deadly; static electricity is almost always safe
In current electricity, there's a single transfer of electrons; in static electricity, there's a steady flow of electrons
Current electricity involves a flow of electrons; static electricity involves a single transfer of electrons
Which is not a way to increase bulb brightness of one of the light bulbs in this circuit?
remove the second light bulb and then close the circuit
add another battery
use a higher power battery
add an additional light bulb
Which is a factor of resistance?
length of the wire
width of the wire
temperature
all of the above
none of the above
Most rocks are magnetic.
Magnets can pull on things without touching them.
True
False
When iron touches a magnet, it becomes a magnet too.
True
False
Once a paperclip touches a magnet and becomes a magnet itself, does a paperclip STAY that way? Or does it stop being a magnet?
stay that way forever
stop being a magnet
stay that way for a short time
Where on a magnet is the magnetic force strongest?
The Poles
All over
Middle
Earth is like a giant magnet due to....
its liquid iron core
the wind patterns of Coriolis Effect
the alignment of the continents
solar particles moving through the atmosphere
Where is Earth's magnetic field strongest?
Along the outside lines
Along the inside lines on either side
Where the lines are close together at the poles
In the space outside of the lines
When _______________ travels through a
conductor, a magnetic field is created
current
a magnetic field
neutrons
Electric currents produce _____________
electron clouds
magnetic fields
sound waves
How can the strength of an electromagnet be increased? (mark all that apply)
increase the current flowing through the coil
increase the number of coils
add an amplifier to it
put iron core inside the coil
Electrons which collect at the negative end of the battery, can flow to the positive end through a ___________________
wire
electron cloud
magnet
What kind of magnet can be turned on and off?
refrigerator magnet
electromagnet
magnetite
iron
In a _______ a spinning turbine moves magnets which generates an electric current.
Motor
Generator
This is a signal that fluctuates exactly like the original signal.
Analog
Digital
High Definition
Binary
A big disadvantage of digital technology is the recording does degrade over time.
True
False
An analog signal is sent in discrete pulses in two states, on= 1 or off= 0.
True
False
The picture shows an example of what kind of signal?
Analog
Digital
Identify a disadvantage of an analog signal:
Requires low power
Doesn't get interference
When copied, quality goes down
Hardware is usually small
Which of the following is an advantage of analog signals
Less prone to interference
Requires less power
Travels Farther
Can carry more detailed information
Something that consumes electricity in a circuit is also known as the _____________________.
power source
connector
switch
load
