wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

FUN- 101 Final

Total questions: 75

Worksheet time: 48mins

Name
Class
Date
1.

Why is it important to place the jack stands on a solid and level surface?

a)

To avoid damaging the vehicle's undercarriage.

b)

To prevent the jack stands from sinking into the ground.

c)

To ensure stability and prevent accidents.

d)

To maintain the proper height and position of the vehicle.

2.
________  _______ with side shields or goggles are to be worn at all times while in the shop
a)
Leather Boots
b)
Leather Gloves
c)
Safety Glasses
d)
Leather Apron
3.

What is the function of CAN data bus line?

a)

·         Allow the use of an earth return system

b)

·         Allow the use of non-conductive electronic cables

c)

·         Used to connect high voltage ECU components

d)

·         Used to connect ECU components via a multiplex system

4.

A __________ is a list of the steps required to get the same result each time a task or activity is performed.

a)

Theory

b)

Measure

c)

Policy

d)

Procedure

5.

Technician A says power tools cause more accidents than hand tools. Technician B says that most accidents are caused by the improper use of simple hand tools. Who is right?

a)

Tech A

b)

Tech B

c)

Neither

6.

"_______ _____ simulates a connection to a live vehicle and works as a training aid to experience the power of JPRO without connecting to a truck."

a)

Flight Simulator

b)

Gran Turismo

c)

Virtual Truck

d)

Angry Birds

7.

The front wheels of a lift truck serve as the ______ between the weight of the truck and the weight the between of the load being carried.

a)

Center of gravity

b)

Seesaw Center

c)

Balance Point

d)

Fulcrum Point

8.

The acetylene pressure to light a torch should be

a)

5 psi

b)

15 psi

c)

25 psi

d)

50 psi

9.

What can be identified as twisted wires running within the engine loom?

a)

a)Diesel pump feed wires

b)

a)CAN bus cables

c)

a)Earth cables

d)

a)High voltage cables

10.
PPE stands for _________  ________ ________
a)
Professional Protective Equipment
b)
Proactive  Protective Equipment
c)
Personal Protective Equipment
d)
Personal Prevention Equipment
11.

Technician A says that some things to look for during a safety inspection are tripping hazards, blocked walkways, and missing fire extinguishers. Technician B says fire extinguishers get inspected by certified inspectors and should not be part of a typical safety inspection. Who is correct?

a)

Technician A

b)

Technician B

c)

Both Technician A and Technician B

d)

Neither Technician A nor Technician B

12.

Before loading and unloading a trailer at a loading dock, you should

a)

Make sure dock plates, boards, and ramps are in place and secure.

b)

All of these

c)

Chock the wheels of the trailer

d)

Inspect the floor of the trailer to ensure it will support the lift truck and load.

13.

What is the primary function of a jack stand?

a)

To lift the vehicle off the ground.

b)

To hold the vehicle in place once it has been lifted.

c)

To repair the vehicle's undercarriage.

d)

To inflate the vehicle's tires.

14.

The temperatures from gas flames using oxyfuels are

a)

150° to 200°F

b)

400° to 500°F

c)

1,000° to 2,000°F

d)

5,000° to 6,000°F

15.
What is the measurement
a)
3/4
b)
7/16
c)
1/2
d)
3/8
16.

What is this measurement?

a)

40 3/8"

b)

3' 4 3/16"

c)

3' - 5 13/16"

d)

40 3/4"

17.

What is the reading shown on the tape?

a)

2' 4 3/4"

b)

2' - 0 3/4"

c)

24 11/16"

d)

2' - 0 5/8"

18.

Name the Components of a Floor jack

a)Apply Piston
b)Slave Piston Access
c)Ram
d)Handle
e)Frame
f)Saddle
g)Caster
h)Wheel
i)Raising Lever
1
2
3
4
5
6
7
8
9
1)
2)
3)
4)
5)
6)
7)
8)
9)
19.

What is the power zone within which you can lift with the least amount of effort?

a)

Knees to shoulders

b)

Knees to mid-chest

c)

Waist to shoulders

d)

Mid-thigh to mid-chest

20.

You should always use jack stands in __________.

a)

Matched pairs

b)

Accordance with local regulations

c)

An emergency

d)

Areas where space is limited for lifting

21.

A vehicle __________ raises the entire vehicle off the ground so that a technician can easily work on the vehicle’s underside.

a)

Trolley

b)

Hoist

c)

Trestle

d)

Jack

22.

CAN

a)

Controller area networking

b)

Communication area networking

c)

Communication area network

d)

Controller area network

23.

After replacing CAN high and CAN low wires on a CAN bus system, how should they be positioned?

a)

·         At different lengths using non-insulated wires

b)

·         At equal lengths using non-conductive wires

c)

·         At equal lengths, insulated and twisted

d)

·         At equal lengths and shielded

24.

CAN is a ...

a)

Message based

b)

Voice based

c)

Numbers based

d)

Code Based

25.

A class C fire is composed mainly composed of...

a)

Wood, Paper, Trash

b)

Combustible Metals

c)

Electrical

d)

Flammable Liquids

26.

What three elements do you need to create fire?

a)

1. Oxygen

2. Fuel

3. Fire

b)

1. Oxygen

2. Fuel

3. Ignition/Heat

c)

1. Oxygen

2. Water

3. Ignition/Heat

d)

1. Oxygen

2. Water

3. Fire

27.

Identify what type of fires this would extinguish.

a)

Kitchen

b)

Automobile

c)

Trash

d)

Metals

28.

_______usually green and have right hand threaded hose connectors.

a)

Acetylene

b)

Oxygen

c)

Propane

d)

Natural Gas

29.

Colorless, Garlic-like odor, Extremely unstable at pressure over 15 psi,

Cylinder contains acetone-saturated porous material to help stabilize fuel gas, Cylinder pressure may be as high as 250 psi when stabilized with acetone, Working pressures range from 1 – 15 psi

a)

Acetylene

b)

Oxygen

c)

Propane

d)

Natural Gas

30.

What is the purpose of a flashback arrestor in a welding setup?

a)

To prevent the flow of gas in the wrong direction

b)

To stop the flame from traveling back into the equipment

c)

To control the pressure of the gas

d)

To cool down the welding torch

31.
What is the name of the main character in the movie Elf?
a)
Bobby
b)
Buddy
c)
Ricky
d)
Charlie
32.

What is the first procedure you should do upon entering the shop?

a)

Go to assigned tables

b)

Safety glasses 

c)

Get directions 

d)

start to work

33.
A chisel head should be replaced or repaired if it is shaped like a(n) _____.
a)
punch
b)
egg
c)
cat's paw
d)
mushroom
34.
In order to transfer a chalk line to a surface, stretch the line tightly and _____.
a)
snap it
b)
press it
c)
rub it back and forth
d)
walk over it
35.
Pliers with serrated teeth that grip flat, square, round, or hexagonal objects are called _____ pliers.
a)
needle-nose
b)
slip-joint
c)
lineman
d)
tongue and groove
36.
Clamps should be discarded when _____.
a)
pliers will no longer attach to the handle
b)
the handle is bent
c)
the frame is bent
d)
glue accumulates on the screw threads
37.

Match the following

a)
1.

Diagonal Pliers

b)
2.

Hacksaw

c)
3.

Coping Saw

d)
4.

Nail Set or Nail Punch

e)
5.

Lineman Pliers

38.

Match the following

a)
1.

Combination Wranch

b)
2.

Box End Wrench

c)
3.

Ratcheting Wrench

d)
4.

Pipe Wrench

e)
5.

Adjustable or Crescent Wrench

39.
Name the following Specialty Tool.
a)
Micro Meter
b)
Dial Caliper
c)
Telescope Gauge
d)
Tachometer
40.
Name the following Specialty Tool.
a)
Flywheel Holder
b)
Flywheel Puller
c)
Ring Compressor
d)
Doughnut Mold
41.
Name the following measuring tool.
a)
Ring Compressor
b)
C Clamp
c)
Tachometer
d)
Micro Meter
42.

A type of Hexagonal tool used to loosen and tighten fasteners:

a)


Allen Wrench

b)

Extension

c)

Screwdriver

d)

Chisel

e)

Speed Handle

43.

Match the following

a)

1.

Multimeter

b)

2.

Micrometer

c)

3.

Vernier Caliper

d)

4.

Telescoping Gauge

e)

5.

Dial Indicator

44.

Match the following

a)

1.

Tap

b)

2.

Die

c)

3.

Bolt Extractor

d)

4.

Helicoil

e)

5.

Jake Tapper the Fake News Anchor

45.

This is a 3-4 inch micrometer. What is it reading?

a)

3.500"

b)

3.610"

c)

4.050"

d)

5.001"

e)

3.250"

46.

Identify the following Part

a)

Wire Feeler Gauge

b)

Metal Fan

c)

Feeler Gauge

d)

Valve Gapper

47.

Identify the tool in the picture.

a)

Rasp

b)

Awl

c)

Punch

d)

Chisel

48.

Match the following

a)
1.

Allen Head

b)
2.

Torx

c)
3.

Metric

d)
4.

Imperial

e)
5.

Castellated

49.

Match the following

a)
1.

Lock Washer

b)
2.

Serrated Washer

c)
3.

Flat Washer

d)
4.

Finishing Washer

e)
5.

Dish Washer

50.

Match the following

a)
1.

Self Tapper

b)
2.

Machine Screw

c)
3.

Set Screw

d)
4.

Cotter

e)
5.

Hair Pin

51.

A chemical compound that prevents threads from loosening. Often Used on Driveline components:

a)

Anti-Seize

b)

Gorilla Glue

c)

Permatex

d)

Loctite

e)

RTV

52.

Match the following

a)
1.

RTV

b)
2.

Loctite

c)
3.

Anti Seize

d)
4.

Grease

e)
5.

KFC Residue

53.

Match the following

a)
1.

Lock Nut

b)
2.

Castle Nut

c)
3.

Wing Nut

d)
4.

Fine Thread Nut

e)
5.

Speed Nut

54.

A ______ is a precise measuring tool used by machinists, engineers and other technicians to take extremely accurate and fine measurements.

a)

Inclinometer

b)

Vernier Clamp

c)

Micrometer

d)

C-Clamp

e)

Linear Caster

55.

What is live data streaming in scan tools?

a)

The ability to remotely control a vehicle's functions using a diagnostic tool.

b)

The process of recording and storing vehicle data for later analysis.

c)

Data streaming from a vehicle's onboard computer to a smartphone app.

d)

Real-time transmission of data from a vehicle's onboard computer to a diagnostic tool.

56.

What is the purpose of freeze frame data in scan tools?

a)

Freeze frame data in scan tools is used to capture and store a snapshot of vehicle sensor data at the time a fault occurs.

b)

Freeze frame data in scan tools is used to capture and store a snapshot of vehicle sensor data at regular intervals.

c)

Freeze frame data in scan tools is used to display real-time vehicle sensor data.

d)

Freeze frame data in scan tools is used to analyze historical vehicle sensor data.

57.

What is this tool

a)

Vise grips

b)

Aviation snips

c)

Tin snips

d)

Snap ring pliers

58.

True or False: Gloves should be worn near moving machinery.

a)

True

b)

False

59.

Documents that give product composition and precautionary information for any material that could present a health or safety hazard. These documents are prepared by the material’s supplier.

a)

Technical Bulletins

b)

Technical Manuals

c)

Evacuation Routes

d)

Safety Data Sheets

60.

Arc radiation can cause what on skin?

a)

Burns

b)

Freckles

c)

Spider veins

d)

Moles

61.

EPA is the abbreviation for which of the following federal organizations responsible for protecting human health and the environment?

a)

Environmental & Persons Agency

b)

Environmental & Persons Association

c)

Environmental Protection Agency

d)

Environmental Protection Association

62.

This sign means that

a)

its raining outside

b)

there is a water leak

c)

a safety shower is located here

d)

wash yourself completely before you leave the lab

63.
What are air tools driven by
a)

Pressurized air

b)
Electricity
c)
Compresses gas
d)
None of these answers are correct
e)
All of these answers are correct
64.
Corded drills
a)

Used when moderate power is needed

b)
doesn't drill large holes thru hard metal
c)
are versatile but limited to amount of work they can do
d)
None of these answers are correct
e)
All of these answers are correct
65.

What is this

a)

bench grinder

b)

straight grinder

c)

angle grinder

d)

air grinder

66.
You should check connections for leaks on welding equipment with:
a)
a match
b)
soap suds
c)
your ear
d)
your hand
67.

The "working" pressure of the acetylene hose should be between

a)

1-5 P.S.I.

b)

5-15 P.S.I.

c)

20-40 P.S.I.

d)

30 - 50 P.S.I.

68.
Cylinders should be set so that they are:
a)
upright and secure
b)
anywhere in the shop
c)
laying on their side
d)
none of the options are correct
69.
When you turn on the oxygen cylinder valve:
a)
never stand directly in front or behind the oxygen regulator
b)
never stand directly in front of the oxygen regulator
c)
never stand directly behind the oxygen regulator
d)
it doesn’t matter where you stand
70.

The part (6) shown in the figure is

a)

Oxygen cylinder

b)

Oxygen hose

c)

Blowpipe

71.

What is the tool name shown in fig.

a)

Nozzle cleaner

b)

Filler rod

c)

Spark lighter

72.
Users must  _____ ______ _____ at the end of class.
a)
leave all tools
b)
leave the area
c)
clean up area
d)
None of the above
73.

True or False: Loose clothing, long sleeves, neckties, and untied shoes are all hazards to machine operators.

a)

True

b)

False

74.

What components support Bi-Directional tests?

a)

Engine

b)

ABS

c)

Body Controller

d)

All the above

75.

An active Internet connection is required to launch the Education Portal.

a)

TRUE

b)

FALSE

Similar Resources on Wayground

311_310_320_321基本概念

72 questions

311_310_320_321基本概念

quiz

Worksheet

•

University

Personal

76 questions

Personal

quiz

Worksheet

•

University

TPS SNBT 1

70 questions

TPS SNBT 1

quiz

Worksheet

•

University

mercantile law 2, chapter 5, 19-25

80 questions

mercantile law 2, chapter 5, 19-25

quiz

Worksheet

•

University

Midterm Exam - Assessment in Student Learning

70 questions

Midterm Exam - Assessment in Student Learning

quiz

Worksheet

•

University

UAS Pengantar Kesehatan Masyarakat DIV Promkes

70 questions

UAS Pengantar Kesehatan Masyarakat DIV Promkes

quiz

Worksheet

•

University

KMB I (RPL)

70 questions

KMB I (RPL)

quiz

Worksheet

•

University

REPASO ORDINARIO ANÁLISIS

76 questions

REPASO ORDINARIO ANÁLISIS

quiz

Worksheet

•

University