NEW
Font size
WorksheetsMetals and Non metals
Total questions: 60
Worksheet time: 3600secs
Identify the correct group of soft metals from the following
Sodium, Alluminium and Copper
Sodium, Potassium and Lithium
Copper, Manganese and Magnesium
Zinc, Barium and Lithium
Zn, Fe, Al and Mg. When we arrange these elements in the ascending order of their
reactivity series we get
Mg < Al < Zn < Fe
Al < Mg < Fe < Zn
Zn < Al < Mg < Fe
Fe < Zn < Al < Mg
_____ is used in vulcanization of rubber
Sodium
Chlorine
Sulphur
Iodine
_______ are used in match sticks heads
Nickel and Phosphorus
Phosphorus and Neon
Gold and Sulfur
Phosphorus and Sulfur
The solution of ash of magnesium ribbon is
acidic
basic
neutral
all of these
Amphoteric oxides react with both acids and alkali to form salt and water. Pick the amphoteric oxide (s)
Aluminium oxide
calcium oxide
zinc oxide
Both aluminium and zinc oxide
Of these, the metals which occur in free state as well as combined state are
Na, Mg
Mg, Au
Zn, K
Cu, Ag
Select the correct statement:
All ores are minerals
All minerals are ores
The correct pair of best conductors of heat are
Alluminium and Silver
Copper and Silver
Silver and Zinc
Zinc and Magnesium
Lead and Mercury are
Best conductors of heat
Bad conductors of heat
Poor conductors of heat
Bad conductors of electricity
Elements do not react with oxygen even at high temperature are
Gold and Silver
Magnesium and Alluminium
Sodium and Potassium
Copper and Zinc
Hydrogen gas is not liberated when a metal reacts with HNO3. This is because
HNO3 is a
Weak oxidizing agent
Strong oxidizing agent
Weak reducing agent
Strong reducing agent
Alloys are the
Heterogenous mixture of metals and non-metals
Heterogenous mixture of two or more metals
Homogenous mixture of metals and non-metals
Homogenous mixture of two or more non-metals
Which of the following alloys contains a non-metal as one of the constituents?
(a) Brass
(b) Amalgam
(c) Steel
(d) Bronze
The atomic number of an element Y is 17. The number of electrons in its ion X− will be:
(a) 17
(b) 18
(c) 19
(d) 20
X+
The atomic number of an element X is 19. The number of electrons in its ion will be:
(a) 19
(b) 18
(c) 20
(d) 21
The atomic numbers of four elements A, B, C and D are 6, 8, 10 and 12 respectively. The two elements
which can react to form ionic bonds (or ionic compound) are:
(a) A and D
(b) B and C
(c) A and C
(d) B and D
Generally, non-metals are not conductors of electricity. Which of the following is a good conductor of
electricity?
(a) Diamond
(b) Graphite
(c) Sulphur
(d) Fullerene
The electronic configurations of three elements X, Y and Z are X – 2, 8; Y – 2, 8, 7 and Z – 2, 8, 2.
Which of the following is correct?
(a) X is a metal.
(b) Y is a metal.
(c) Z is a non-metal.
(d) Y is a non-metal and Z is a metal.
An element A is soft and can be cut with a knife. This is very reactive to air and cannot be kept in open.
It reacts vigorously with water. Identify the element from the following:
(a) Mg
(b) Na
(c) P
(d) Ca
Metals are refined by using different methods. Which of the following metals are refined by electrolytic
refining?
(i) Au
(ii) Cu
(iii) Na
(iv) K
(a) (i) and (ii)
(b) (i) and (iii)
(c) (ii) and (iii)
(d) (iii)and (iv)
An alloy reacted with dilute hydrochloric acid to produce a gas which ‘pops’ a lighted splint. The
residue reacted with dilute nitric acid to form a blue solution. Which one of the following pairs of
metals is present in the alloy?
(a) Copper and lead
(b) Lead and magnesium
(c) Copper and magnesium
(d) Lead and zinc
Generally metals react with acids to give salt and hydrogen gas. Which of the following acids does not
give hydrogen gas on reacting with metals (except Mn and Mg)?
(b) HCl
(c) HNO3
(d) All of these
Due to its semiconductor properties the non-metal used in computer, T.V. etc. is
(a) Carbon
(b) Silicon
(c) Bromine
(d) Fluorine
Aluminium is used for making cooking utensils. Which of the following properties of aluminium are
responsible for the same?
(i) Good thermal conductivity
(ii) Good electrical conductivity
(iii) Ductility
(iv) High melting point
(a) (i) and (ii)
(b) (i) and (iii)
(c) (ii) and (iii)
(d) (i) and (iv)
The ability of metals to be drawn into thin wires is known as
(a) ductility
(b) malleability
(c) sonority
(d) conductivity
Which one of the following metals do not react with cold as well as hot water?
Na
Ca
Mg
Fe
Which of the following oxide(s) of iron would be obtained on prolonged reaction of iron with steam?
FeO
Fe2O3
Fe3O4
Fe2O3 and Fe3O4
Which of the following are not ionic compounds?
(i) KCl
(ii) HCl
(iii) CCl4
(iv) NaCl
(i) and (ii)
(ii) and (iii)
(iii) and (iv)
(i) and (iii)
Although metals form basic oxides, which of the following metals form an amphoteric oxide ?
Na
Ca
Al
Cu
Al2O3 + 2NaOH → …… + H2O
Al(OH)3
Na2O
NaAlO2
AlNaO2
Which of the following metals catch fire on reaction with air?
Magnesium
Manganese
Potassium
Calcium
What is the formula of the only important ore of Hg?
Hg2S
HgS2
Hg3S
HgS
What is the composition of Solder?
Tin + copper.
Zinc + copper.
Tin + lead
Tin + Zinc
Which metal has the highest melting point?
Sn
W
Sb
Pb
Which is the most reactive Halogen ?
Iodine.
Chlorine .
Fluorine.
Bromine.
When Phosphorous is burnt in air, it reacts with oxygen to form
Phosphorous Pentoxide
Phosphorous Septoxide
Phosphorous Octoxide
Phosphorous Oxide
Sulphur dioxide dissolves in water to form
Sulphuric acid
Sulphurous acid
Sulphur hydroxide
Sulphurous oxide
Which of the following is the most reactive element in the following?
Nickel
Lead
Aluminium
Zinc
Which of these compounds is commercially called hydrolith
Potassium Hydride .
Sodium Hydride.
Calcium Hydride.
Magnesium Hydride
Which of the following metal is used in strengthening the economy and defense of a country?
Copper
Aluminium
Titanium
Manganese
Anodising is a process of forming a
Thick oxide layer of zinc.
Thin hydroxide layer of zinc.
Thick oxide layer of aluminium.
Thick hydroxide layer of aluminium.
Cans are coated with tin not with zinc
Zinc is more reactive
Zinc is costlier
Zinc has a higher melting point
Zinc is less reactive
which of the following is the best malleable metal?
Silver
Aluminium
Gold
lead
The process of coating iron with a thin layer is called?
Galvanisation
rusting
sublimation
Photosynthesis
Pure gold is off?
23 carats
22 carats
24 carats
26 carats
Potassium (K), an alkali metal, and magnesium (Mg), an alkaline earth metal, both combine readily with bromine (Br), a halogen. What compound will each element (K and Mg) most likely form with bromine?
KBr and Mg2Br
KBr and MgBr
K2Br and Mg2Br
KBr and MgBr2
Unknown element W has 2 valence electrons. Unknown element X has 7 valence electrons. Which formula shows the most likely outcome when elements W and X react?
WX
WX2
W2X
W2X2
A strong oxidising agent is
Hydrochloric acid
Methanoic acid
Nitric acid
Acetic acid
