Font size
WorksheetsDigital Electronics last review
Total questions: 100
Worksheet time: 3hrs 23mins
What are the symbols used to represent digits in the binary number system?
0,1
0 through 8
0,1,2
1,2
The circuit schematic image above represents an:
Resistor
LED
Transistor
Diode
8 x 104
A transistor is most closely related to which of the following
Resistor
ransistor
switch
current
I / Current is the speed/direction of electric flow measured in which of the following?
Watts
Volts
Amps
Ohms
A carbon resistor's level is measured in which of the following units?
Resistance
Ohms
greek omega
voltage
The symbol above best represents which of the following?
Voltage
Power
Ground
LED
The breadboard above has electrical connections in series of:
5
4
20
all are connected
The water tank in the water - electricity analogy is best compared to which of the following?
volts
current
amps
resistance
Express 0.021 amps in SI notation
21 A
21 mA
2.1 mA
21 kA
Express 4782000 Ohms in SI notation
4.782 MΩ
4.782 mΩ
4782 kΩ
4782 Ω
Which logic gate is this?
AND
OR
XOR
NOT
What will the circuit's output be?
1
0
Which Logic gate does this Truth Table represent?
AND Gate
OR Gate
NOT Gate
NAND Gate
Which logic gate is shown?
NOR Gate
XOR Gate
XNor Gate
AND Gate
NAND gate
Which logic gate is shown?
AND gate
OR gate
NOT gate
NOR gate
What gate is represented by the truth table shown?
NOR gate
NOT gate
AND gate
XOR gate
Convert the binary number 01011 into decimal
10
11
13
12
The NOR Gate is OR Gate followed by ...............
OR Gate
NOT Gate
AND Gate
None of the above
What is the meaning of 0 in a Digital signal?
Max possible value
No current/voltage
A light On
A light Off
If both inputs have to be TRUE, which truth table represents that logical relationship?
If both inputs have to be FALSE, which truth table represents that logical relationship?
Which logic gate outputs TRUE if one, but NOT BOTH inputs is true?
When an input to a logic chip has no connection to positive or negative, the logic gate will freak out. These switches are an example of that because they are missing....
Floaters
Pull Down Resistors
LEDs
Pull Up Resistors
When an input to a logic chip has no connection to positive or negative, the logic gate will freak out. That condition, not being connected is called:
Pulling Down
Drifting
Floating
Lifting
Logic gate circuits require lots of positive and negative connections. The thing they connect to is called a...
Breaker
Shuttle
Bus
Array
The left side is connected to
5V Positive
The "ground" negative
An electric Jelly fish
A ray
Which situation would make the most sense to use an AND gate?
Sound the alarm if smoke it detected. Sound the alarm if the manual lever is pulled. Sound the alarm if both happen.
The missile should launch when both buttons are pushed.
The night light should turn on when the regular lights are OFF (no light detected).
Do not turn on the sprinklers it rained today or there is a football game today.
Which situation would make the most sense to use an NOR gate?
Sound the alarm if smoke it detected. Sound the alarm if the manual lever is pulled. Sound the alarm if both happen.
The missile should launch when both buttons are pushed.
The night light should turn on when the regular lights are OFF (no light detected).
Do not turn on the sprinklers it rained today or there is a football game today.
Which situation would make the most sense to use an NOT gate?
Sound the alarm if smoke it detected. Sound the alarm if the manual lever is pulled. Sound the alarm if both happen.
The missile should launch when both buttons are pushed.
The night light should turn on when the regular lights are OFF (no light detected).
Do not turn on the sprinklers it rained today or there is a football game today.
Which situation would make the most sense to use an ORgate?
Sound the alarm if smoke it detected. Sound the alarm if the manual lever is pulled. Sound the alarm if both happen.
The missile should launch when both buttons are pushed.
The night light should turn on when the regular lights are OFF (no light detected).
Do not turn on the sprinklers it rained today or there is a football game today.
When lots of elements are built into a single circuit, it is called a chip, or a(n)
transistor.
integrated circuit.
drive.
input.
If I turn on one switch, and turn the other off, which gate would output TRUE?
AND
NOR
XNOR
OR
If I turn on one switch, and turn the other on, which gate would output FALSE?
AND
NAND
XNOR
OR
If I turn off one switch, and turn the other off, which gate would output TRUE?
AND
NOR
XOR
OR
The circle at the end of some gates means NOT. How does adding the the word NOT change the outputs?
It changes one output to false.
It reverses all the outputs, changes 0 --> 1 and 1 -->0.
It makes all inputs true.
It makes all inputs false.
Which gate outputs true only if the inputs are both true, or both false?
AND
NOR
XNOR
OR
Which 2 gates only have 1 input?
AND
IF
OR
NOT
Write the SOP.
RT + RS
R'T + RS
R'T + RS'
RTS
Write the SOP.
RSU' + S'T'T + R'U + ST
RSU+STU+RU+ST
RSU'+S'T'U+RU
ST+RSU'
Write the SOP.
B+D
B'+D
B+D'
B'+D'
Write the SOP.
FG'+F'G
FG+F'G
FG'+FG
FG
Write the SOP.
W
W'
X
X'
Write the SOP.
A'B+B'C
AB'+BC'
AC+B
AB+B'C
Write the SOP.
0
1
A
B
J
J'
K
K'
Write the SOP.
A'B'C'D+A'BC+BCD'
A'B'C'D+ABC+BCD'
A'B'C'D+A'BC+BCD
A'B'C'D+A'BC
Write the SOP
B'C+A'C
B'C+A'C+AC'
BC+AC
B'C+AC+AC'
Write the SOP.
A'C+B'C
A'C+BC
AC+B'C
AC+BC
Write the SOP.
A'C'+AC
AC
BC+B'C'
C'A+A
Write the SOP.
A
B
A'
B'
Write the SOP.
C
C'
A
B
Write the SOP.
A'C'
B'C
A'C
AC
What unit is used to measure current?
Ohms
Omega
Volts
Amps
What unit is used to measure resistance?
Ohms
Omega
Volts
Amps
What is the current in a circuit with 6 ohms of resistance and a battery containing 24 Volts?
1/4 A
144 A
4 A
0.4 A
What is the resistance of a lightbulb that experiences 9 Volts and 3 amps of current?
1/3 ohms
3 ohms
27 ohms
9 ohms
What is the voltage of a circuit with 4 ohms of resistance and 3 amps of current?
12 V
21 V
4/3 V
3/4 V
What is the formula for ohms law?
1+2=3
R X E = I
V =I x R
E= MC squared
RT = ?
3.66 ohms
4.77 ohms
5.88 ohms
11 ohms
RT = ?
4.8 ohms
6.5 ohms
15 ohms
25 ohms
If each resistor is 3 ohms, what is the RT?
3 ohms
1 ohms
6 ohms
9 ohms
R1 = 10 ohms
R2 = 2 ohms
RT = ?
1.67 ohms
3.67 ohms
12 ohms
22 ohms
RT = ?
16.67 ohms
66.67 ohms
96.67 ohms
150 ohms
The method to solve for this scenario is known as the...
Product Over Sum Method
Reciprocal Method
Value Over Number Method
Scientific Method
R1 = 40 ohms
R2 = 40 ohms
RT = ?
2 ohms
20 ohms
10 ohms
5 ohms
R1 = 10K ohms
R2 = 1K ohms
408.7 ohms
909.1 ohms
1.5K ohms
11K ohms
Of the three scenarios you could encounter regarding resistors in parallel, which one uses the reciprocal method?
Multiple resistors that are all the same value
Three or more resistors of different value
Two resistors of unequal value
Of the three scenarios you could encounter regarding resistors in parallel, which one uses the product over sum method?
Multiple resistors that are all the same value
Three or more resistors of unequal value
Two resistors of unequal value
Of the three scenarios you could encounter regarding resistors in parallel, which one solves RT by dividing the value of one resistor by the number of resistors in parallel?
Multiple resistors that are all the same value
Three or more resistors of unequal value
Two resistors of unequal value
The binary for 15 is
111
1111
1100
