wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Health and Safety Plumbing 6035 L2

Total questions: 39

Worksheet time: 20mins

Name
Class
Date
1.

Which Act governs workplace health and safety in the UK?

a)

Factories Act 1961

b)

Employment Rights Act 1996

c)

Health and Safety at Work etc. Act 1974

d)

Workplace Regulations Act 1985

2.

Who enforces health and safety laws in most workplaces in the UK?

a)

Ministry of Labour

b)

Local police authority

c)

Health and Safety Executive (HSE)

d)

British Standards Institute

3.

What is required under the Control of Substances Hazardous to Health Regulations 2002 (COSHH)?

a)

Report all incidents to the fire service

b)

Employers to lock all substances hazardous to health and a cupboard

c)

Ban use of all chemicals

d)

Use only pre-approved foreign substances

4.

What law requires suitable PPE to be provided where risks cannot be otherwise controlled?

a)

The Health and Safety at Work Act

b)

The Personal Protective Equipment at Work Regulations

c)

The Building Safety Act

d)

The Provision and Use of Work Equipment Regulations

5.

Which of the following is a duty of an employer under the Manual Handling Operations Regulations 1992?

a)

Ban all lifting tasks

b)

Provide electric trolleys for all lifting

c)

Avoid manual handling where reasonably practicable

d)

Ensure employees lift items alone

6.

What must be included in a written risk assessment?

a)

Personal opinions about risks

b)

Control measures for identified hazards

c)

Financial cost of hazards

d)

Health questionnaire results

7.

When must a health and safety policy be written down?

a)

If the company works in construction

b)

When a workplace has 5 or more employees

c)

Only for public sector employers

d)

For temporary workplaces only

8.

What type of jointing method should be avoided when working in a roof space?

a)
Soldering
b)

manipulative compression

c)

Non-manipulative compression

d)

Pressfit

9.

What is the purpose of the RIDDOR?

a)

To document workplace training

b)

To notify the local council of minor complaints

c)

To report work-related injuries and diseases

d)

To check employee sickness absence

10.

What does the abbreviation RIDDOR stand for?

a)

Requirement, Incidences, Dangerous, Distractions Or Regulations

b)

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations

c)

Reporting of Incidences, Diseases and Dangerous Occurrences Regulations

d)

Requirements of Injuries, Diseases and Dangerous Occurrences Regulations

11.

Under UK law, who has the duty to take reasonable care for their own safety?

a)

Only the employer

b)

The site inspector

c)

The employee

d)

The client

12.

What is the first step in conducting a risk assessment?

a)

Install signage

b)

Provide PPE

c)

Identify hazards

d)

Write a method statement

13.

When lifting heavy materials manually, what should be done first?

a)

Start lifting immediately

b)

Ask a colleague to supervise

c)

Assess the weight and posture

d)

Remove footwear

14.

What is the purpose of a method statement?

a)

To estimate project costs

b)

To describe how work will be safely carried out

c)

To record customer details

d)

To replace risk assessments

15.

Which of the following is a hazard rather than a risk?

a)

A worker may fall

b)

Wet floor

c)

Poor training

d)

Worker tripping

16.

Why should health and safety signs be used in the workplace?

a)

To decorate the site

b)

To replace training

c)

To warn about dangers

d)

To follow marketing rules

17.

Which of the following should be worn when cutting copper pipe?

a)

High-visibility jacket

b)

Ear defenders

c)

Safety goggles

d)

Gloves

18.

What is the best control method for avoiding electric shock when working near live cables?

a)

Wear gloves

b)

Use battery-powered tools

c)

Isolate the electrical supply

d)

Work quickly

19.

Why are toolbox talks important?

a)

They reduce paperwork

b)

They ensure wages are discussed

c)

They promote ongoing safety awareness

d)

They replace formal training

20.

How should a safety breach be reported on site?

a)

Through a text message

b)

Through the company’s safety reporting system

c)

To the nearest co-worker only

d)

Using a verbal warning to others

21.

Which material commonly used in older plumbing installations is now a banned health hazard?

a)

PVC

b)

Brass

c)

Lead

d)

Copper

22.

How can exposure to asbestos be prevented?

a)

Use a wet cloth to wipe it

b)

Drill slowly

c)

Avoid disturbing suspected materials and report it

d)

Paint over it

23.

Which gas is colourless, odourless, and potentially fatal if inhaled?

a)

Methane

b)

Nitrogen

c)

Carbon monoxide

d)

Oxygen

24.

Where is asbestos most likely to be found in domestic plumbing?

a)

Modern taps

b)

Plastic pipework

c)

Pipe insulation

d)

Chrome fittings

25.

What should you do if a chemical gets into your eyes on site?

a)

Rub your eyes

b)

Rinse with clean water and seek medical attention

c)

Cover with a cloth

d)

Blink repeatedly

26.

What information does a COSHH assessment provide?

a)

Tools required for plumbing

b)

Substance cost analysis

c)

Hazards and control measures for chemicals

d)

Brand preferences

27.

What is the correct colour for a mandatory sign?

a)

Yellow

b)

Blue

c)

Green

d)

Red

28.

Which document outlines the safe use, storage, and handling of a hazardous product?

a)

Manufacturer’s invoice

b)

Building regulations

c)

Safety data sheet

d)

Purchase order

29.

What does a yellow and black triangular sign indicate?

a)

Prohibition

b)

Warning

c)

Mandatory action

d)

Safe condition

30.

Which fire extinguisher is suitable for use on an electrical fire?

a)

Water

b)

Foam

c)

CO₂

d)

Wet chemical

31.

What should be done before using a power tool?

a)

Spray with lubricant

b)

Check the weather forecast

c)

Inspect the tool for damage and test function

d)

Plug it in and start work

32.

How should extension cables be used to avoid trip hazards?

a)

Hang them from ceilings

b)

Run them across doorways

c)

Route them safely and tape down if needed

d)

Keep them coiled

33.

Which of the following is the correct procedure when isolating a plumbing system?

a)

Close the stopcock and test outlets

b)

Turn off electrical supply

c)

Remove any visible pipework

d)

Block the drains

34.

What is the main risk of not securing ladders properly?

a)

Discomfort when climbing

b)

Time delays

c)

Falling from height

d)

Rain damage

35.

What must be done when working at height under UK law?

a)

Use a fixed ladder only

b)

Work alone to reduce distraction

c)

Carry out a risk assessment

d)

Avoid using PPE

36.

What type of fire extinguisher should not be used on oil fires?

a)

Wet chemical

b)

Foam

c)

Water

d)

CO₂

37.

When must a portable appliance test (PAT) be carried out?

a)

Before leaving the site

b)

After the appliance fails

c)

As part of regular maintenance

d)

Only on gas tools

38.

Which item is considered personal protective equipment (PPE)?

a)

Tape measure

b)

Pipe cutter

c)

Safety boots

d)

Spirit level

39.

What should be done if you receive a minor electric shock on site?

a)

Continue working

b)

Record it in the accident book and report it

c)

Go home immediately

d)

Tell a co-worker privately