IGCSE PHYSICS Revision 2: Moments

What is the anticlockwise moment acting on this crane?

• 80,000Nm
• 100,000Nm
• 120,000Nm
• 140,000Nm

What is the moment acting on the seesaw?

• 1.6Nm
• 15Nm
• 16N
• 4Nm

Tags

NGSS.HS-PS2-1

A seesaw is unbalanced with two people of different masses sitting equal distances from the center. Which of the following will result in equilibrium?

• The larger person moving further away from the center.
• Moving the smaller person closer to the center.
• Moving the smaller person further from the center.
• Making the larger person do nothing.

Tags

NGSS.HS-PS2-1

Two masses of mass 10.0 and 6.0 kg are hung from massless strings at the end of a light rod. The rod is virtually weightless. A pivot (fulcrum) is placed off center and the system is free to rotate. If the 6.0 kg mass is 4.0 m away from the pivot, how far away is the 10.0 kg mass if the system is not rotating?

• 0.42 m

• 2.4 m

• 4.8 m

• 4.2 m

What is the moment produced by the 15 N?

• 15 Nm (clockwise)
• 150 Nm (anti - clockwise)
• 1.5 Nm (anti - clockwise)
• 0.15 Nm (clockwise)

The easiest way to open a heavy door  is by applying the force

• Near the hinges
• In the middle of the door
• At the edge of the door far from the hinges
• At the top of the door

Tags

NGSS.HS-PS2-1

A wrench is used to tighten a nut. A 15N perpendicular force is applied 50cm away from the axis of rotation, and moves a distance of 10 cm as it turns. What is the torque applied to the wrench?

• 7.5 Nm
• 1.5 Nm
• 750 Nm
• 150 Nm

Tags

NGSS.HS-PS2-1

Assuming the system is in equilibrium, calculate the missing distance d

• 3.4 m

• 2.8 m

• 4.4 m

• 1.6 m

Tags

NGSS.HS-PS2-1

The diagram shows a beam. Without any weights, the beam balances at its centre.

Three weights are hung as shown.

At which point does a load of 2 N balance the beam?

• A

• B

• C

• D

Tags

NGSS.HS-PS2-1

A nut can be loosened more easily with

• a short spanner because a larger turning effect can be produced.

• a long spanner because a larger turning effect can be produced.

• a long spanner because a larger force can be produced.

• a short spanner because a larger force can be produced.

Tags

NGSS.MS-PS2-2