Font size
WorksheetsÔn Tập Thủy Lực Khí Nén
Total questions: 160
Worksheet time: 2hrs 48mins
Dầu thủy lực trong các hệ thống truyền động thủy lực hoạt động với:
Tốc độ cao và áp suất cao
Tốc độ cao và áp suất không nhất thiết phải cao
Không tốc độ cao nhưng áp suất cao
Trong chất lỏng, áp suất (do trọng lượng và lực bên ngoài) tác động lên mỗi phần tử của chất lỏng:
Phụ thuộc vào hình dạng của bình chứa.
Không phụ thuộc vào hình dạng của bình chứa.
Phụ thuộc vào các điều kiện cụ thể
Áp suất trong chất lỏng tác động:
Theo phương thẳng đứng
Đều ở mọi hướng
Theo phương ngang
Trong một ống kín:
Độ lưu lượng tại tất cả các mặt cắt của ống là như nhau
Mặt cắt ống lớn hơn có nghĩa là độ lưu lượng lớn hơn.
Mặt cắt ống nhỏ hơn có nghĩa là độ lưu lượng lớn hơn.
Sơ đồ thủy lực tạo ra chuyển động thẳng:
Có một bộ truyền động là động cơ
Có một bộ truyền động là xi lanh
Có một bộ truyền động là cả xi lanh và động cơ
Sơ đồ thủy lực tạo ra chuyển động quay:
Có một bộ truyền động là động cơ
Có một bộ truyền động là xi lanh
Có một bộ truyền động là cả xi lanh và động cơ
Volume loss in hydraulic drive is due to:
Hydraulic oil flowing through gaps in system components
Hydraulic oil flowing through joints in the transmission line
Hydraulic oil flowing through pressure relief valve during operation
Mechanical loss in hydraulic drive is due to:
Friction between moving parts in the oil pump and motor (cylinder force)
Friction between parts
Mechanical losses in hydraulic boats are due to:
Friction between moving parts in the oil pump and engine (force cylinder) oil.
Friction between moving parts in the oil pump and engine oil.
Friction between moving parts in the oil pump.
Pressure loss in hydraulic boats is due to:
Sự giảm áp suất do trở lực trên đường chảy dầu từ bơm đến xi lanh lực.
Sự giảm áp suất do trở lực trên đường chảy dầu từ bơm đến động cơ đầu.
Sự giảm áp suất do trở lực trên đường chảy dầu từ bơm đến bộ truyền động.
Độ nhớt của dầu thủy lực:
Xác định ma sát trong chính chất lỏng.
Ma sát trong chính chất lỏng và cho thấy khả năng chống lại sự biến dạng trượt hoặc biến dạng cắt của chất lỏng.
Cho thấy khả năng chống lại sự biến dạng trượt hoặc biến dạng cắt của chất lỏng.
Xác định khả năng bôi trơn và làm mát của chất lỏng.
Các tiêu chí cơ bản để đánh giá chất lượng dầu thủy lực là:
Độ nhớt, khả năng chịu nhiệt, độ ổn định của các tính chất hóa học.
Các tính chất vật lý, khả năng chống gỉ, khả năng chống ăn mòn của các bộ phận cao su, khả năng bôi trơn.
Khả năng tạo bọt, điểm chớp cháy, điểm đông đặc.
Tất cả các yếu tố trên.
One of the requirements for hydraulic oil is:
Good lubrication ability over a wide temperature range; Viscosity depends on temperature.
Good lubrication ability over a wide temperature and pressure range; Viscosity is less dependent on temperature.
Oil must have low foaming, good evaporation when working, and dissolve well in water and air.
Good thermal conductivity, elastic modulus, thermal expansion coefficient, and high density.
One of the requirements for hydraulic oil is:
One of the requirements for hydraulic oil is:
Good lubrication ability over a wide temperature range; Viscosity depends on temperature;
Good lubrication ability over a wide temperature range and pressure; Viscosity depends well on temperature;
Oil must have low foaming, evaporate well during operation and be less soluble in water and air.
Good thermal conductivity, elastic modulus, thermal expansion coefficient, and large density.
One of the requirements for hydraulic oil is:
Good lubrication ability over a wide temperature range; Viscosity depends on temperature;
Good lubrication ability over a wide temperature range and pressure; Viscosity depends well on temperature;
Oil must have low foaming, evaporate well during operation and be soluble in water and air.
Good thermal conductivity, elastic modulus, thermal expansion coefficient, and small density.
Đơn vị của độ nhớt động là
Poise
Ns/m²
Pa.s
Tất cả 3 câu trả lời đều đúng
1 at technical equals
10mH₂O
735.5mmHg
9.81×10⁴ Pa
Tất cả 3 câu trả lời đều đúng
Áp suất tại một điểm trong chất lỏng có đặc tính
Vuông góc với diện tích chịu lực
Có đơn vị là Pa
Là lực pháp tuyến của chất lỏng tác động lên một đơn vị diện tích
Tất cả 3 câu trả lời đều đúng
Áp suất tĩnh phụ thuộc vào:
Chiều cao của cột chất lỏng
Tốc độ dòng chảy
Hình dạng của bình chứa chất lỏng
Diện tích bề mặt của chất lỏng
Chọn lựa chọn đúng
1bar = 1N/m²
1bar = 1Pa
1bar = 10⁵ Pa
1at = 10⁵ bar
How are temperature and viscosity related?
As temperature increases, viscosity also increases
As temperature increases, viscosity decreases.
Viscosity does not depend on temperature.
mối quan hệ giữa nhiệt độ và độ nhớt là gì?
Nhiệt độ tăng, độ nhớt cũng tăng
Nhiệt độ tăng, độ nhớt giảm
Độ nhớt không phụ thuộc vào nhiệt độ
Tất cả ba tùy chọn đều sai
Đơn vị của độ nhớt động là gì?
1P = 1(N.s/m2)
1P = 1(Pa.s)
1P = 0.1(N.s/m2)
1P = 10(Pa.s)
Chuyển đổi đơn vị sau?
1P = 10cP
1P = 100cP
1P = 1000cP
1P = 0.1cP
Chọn lựa chọn đúng?
Thay đổi thể tích phụ thuộc vào áp suất
Thay đổi thể tích phụ thuộc vào độ nhớt của chất lỏng
Thay đổi thể tích phụ thuộc vào vận tốc của chất lỏng
Phụ thuộc vào cả ba yếu tố trên
Chọn câu trả lời đúng. Khi một chất lỏng chảy liên tục trong một ống với lưu lượng
Luôn thay đổi
Giữ nguyên
Không xác định
Không có tùy chọn nào là đúng
Trong một hệ thống thủy lực, sự mất áp suất phụ thuộc vào những yếu tố nào?
Độ nhớt
Bề mặt và chiều dài của ống
Trọng lượng riêng của chất lỏng
Tất cả các yếu tố trên
Which statement is incorrect? The pressure at the bottom of a liquid container depends on:
The specific weight of the liquid
Gravitational acceleration
The height of the liquid column
The surface area of the liquid
Độ nhớt tuyệt đối được ký hiệu bằng:
(γ)
(ν)
(μ)
(ρ)
Chọn phương án đúng?
Độ lưu lượng của chất lỏng chảy qua các mặt cắt khác nhau của ống là như nhau
Độ lưu lượng của chất lỏng chảy qua các mặt cắt khác nhau của ống là khác nhau
Cả hai phương án trên đều không đúng
Chọn câu đúng:
Áp suất của chất lỏng tác động vuông góc lên bề mặt của vật thể
Tại mỗi điểm của chất lỏng, áp suất ở tất cả các hướng là như nhau
Áp suất tại các điểm có độ sâu khác nhau là khác nhau
Tất cả ba tùy chọn đều đúng
Áp suất của một chất lỏng nén một vật thể là vuông góc với bề mặt của vật thể.
Tại mỗi điểm của chất lỏng, áp suất ở tất cả các hướng là như nhau.
Áp suất tại các điểm có độ sâu khác nhau là khác nhau.
Tất cả ba tùy chọn trên.
Đơn vị đo lường cho mật độ là gì?
(m^3/kg)
(m^3)
(kg/m^3)
(N/kg)
Chọn đơn vị đo lường cho mô-men xoắn.
N
N/m
Nm
N/m^2
Chọn câu trả lời đúng.
1N/m^2 = 10000N/cm^2
1N/m^2 = 10^-4 N/cm^2
1N/m^2 = 100N/cm^2
1N/m^2 = 10N/cm^2
Which statement is correct?
Pressure is the force applied to a unit area of the surface of an object.
It is the force applied inside the object.
It is the force applied to the surface of the object.
It is the mass of the object.
Chọn phương án đúng.
Diện tích mặt cắt của ống càng lớn, tổn thất áp suất càng lớn.
Diện tích mặt cắt của ống càng nhỏ, tổn thất áp suất càng lớn.
Tổn thất áp suất không phụ thuộc vào diện tích mặt cắt của ống.
Tổn thất áp suất không phụ thuộc vào sự thay đổi diện tích mặt cắt.
Đơn vị đo lường cho thể tích riêng là gì?
m^3/kg
m^3
kg/m^3
N/kg
Công thức nào được sử dụng để tính công suất?
Chọn câu không đúng.
Áp lực của một chất lỏng nén một vật thể là vuông góc với bề mặt của vật thể.
Áp lực bằng với lực trên diện tích bị nén.
Tại mỗi điểm của chất lỏng, áp lực ở tất cả các hướng là như nhau.
Áp lực tại các điểm có độ sâu khác nhau là khác nhau.
Cho 3 thùng chứa cùng loại chất lỏng với diện tích đáy bằng nhau. Thùng chứa 1 có đáy hình vuông, thùng chứa 2 có đáy hình tròn, và thùng chứa 3 có đáy hình tam giác. Chiều cao của chất lỏng trong mỗi thùng chứa là như nhau. Đáy nào chịu áp lực lớn nhất?
Thùng chứa 1
Thùng chứa 2
Thùng chứa 3
Cả 3 thùng chứa đều có áp lực bằng nhau ở đáy.
Công suất thủy lực của một xi lanh được tính bằng công thức N = F.v, trong đó các kích thước của các biến là...
Which tank experiences the highest pressure?
Tank 1
Tank 2
Tank 3
All 3 tanks have equal pressure at the bottom
Công suất thủy lực của một xi lanh được tính theo công thức N = F.v, các kích thước của các đại lượng là:
N (W), F(Nm), v(m/s)
N (kW), F(Nm), v(m/s)
N (W), F(N), v(m/s)
N (kW), F(N/m), v(m/s)
Công suất thủy lực của một xi lanh được tính theo công thức N = p.Q, các kích thước của các đại lượng là:
N (W), p(Nm), Q(lít/giây)
N (kW), p(bar), Q(lít/phút)
N (W), p(N/m²), Q(lít/phút)
N (W), p(N/m²), Q(m³/giây)
Which statement is incorrect? The pressure at the bottom of a liquid container depends on:
The surface area of the liquid.
The height of the liquid column.
The gravitational acceleration.
The specific weight of the liquid.
Những nhược điểm của hệ thống thủy lực là:
Thất thoát trong ống dẫn và rò rỉ ở các thành phần, làm giảm hiệu suất và giới hạn phạm vi sử dụng.
Khó duy trì tốc độ ổn định khi tải thay đổi do tính nén của chất lỏng và tính đàn hồi của ống dẫn.
Khi khởi động, nhiệt độ của hệ thống không ổn định, và tốc độ làm việc thay đổi do độ nhớt của chất lỏng thay đổi.
Tất cả các điều trên
Hệ thống truyền động thủy lực tĩnh là:
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng áp suất.
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng động.
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng tiềm năng.
Hệ thống truyền động thủy lực động học là:
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng áp suất.
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng động.
Một hệ thống mà năng lượng được truyền dưới dạng năng lượng tiềm năng.
The hydraulic oil in the static hydraulic drive system operates with:
High speed and high pressure.
High speed and low pressure.
Dầu thủy lực trong hệ thống truyền động thủy lực thủy tĩnh làm việc có:
Vận tốc cao và áp suất lớn
Vận tốc cao và áp suất không cần lớn
Vận tốc không cao nhưng áp suất lớn
Trọng lượng riêng của chât lỏng là
Trọng lượng của một đơn vị khối lượng chất lỏng
Khối lượng của một đơn vị trọng lượng chất lỏng
Trọng lượng của một đơn vị thể tích chất lỏng
Khối lượng của một đơn vị thể tích chất lỏng
Khối lượng riêng của chât lỏng là
Khối lượng của một đơn vị thể tích chất lỏng
Khối lượng của một đơn vị khối lượng chất lỏng
Khối lượng của một đơn vị trọng lượng chất lỏng
Trọng lượng của một đơn vị thể tích chất lỏng
Câu nào sau đây sai về chất lỏng?
Hệ số nén của chất lỏng luôn =1
Áp suất của mỗi phần tử chất lỏng phụ thuộc vào chiều cao cột chất lỏng
Áp suất của mỗi phần tử chất lỏng không phụ thuộc vào hình dạng bình chứa
Chất lỏng mang hình dạng bình chứa
Đơn vị đo độ nhớt của chất lỏng là
Poazơ
N.s/m2
Pa.s
Cả 3 đáp án trên đều đúng
Trong thủy lực người ta áp dụng các phương pháp nghiên cứu
Mô hình hóa
Dùng các đại lượng trung bình
Dùng các đại lượng vô cùng nhỏ
Các đáp án kia đều đúng
Mô đun đàn hồi thể tích E của chất lỏng
Có đơn vị là N/m2
Có trị số nhỏ khi chất lỏng dễ nén
Là nghịch đảo của hệ số nén
Cả 3 đáp án đều đúng
Đơn vị đo độ nhớt động học là
m2/s
Pa.s
Ns/m2
Cả 3 đáp án trên đều sai
Đối với chất lỏng thực ở trạng thái tĩnh
Ứng suất tiếp tỷ lệ tuyến tính với nhiệt độ
Ứng suất tiếp không tồn tại
Độ nhớt bằng 0
Ứng suất tiếp tỷ lệ tuyến tính với trọng lượng chất lỏng
What is the relationship between shear stress and temperature in a static liquid?
Shear stress is linearly proportional to temperature
Shear stress does not exist
Viscosity is zero
Shear stress is linearly proportional to the weight of the liquid
What is the correct statement about a technical at?
All 3 answers are correct
9.81 x 10^4 Pa
735.5 mmHg
10 mH2O
What is the hydrostatic pressure at a point in a liquid characterized by?
All 3 answers are correct
It is the normal force of the liquid acting on a unit area
It has units of Pa
It is perpendicular to the area under force
A hydraulic device has an input pressure p1 = 10 bar, output pressure p2 = 1 bar, the flow rate supplied to the device is 20 liters/min, and the flow rate out of the device is 19.5 liters/min. What is the efficiency of the device?
η = 0.9
η = 0.95
η = 0.855
η = 0.8
A vertical pipe has a base area of 100 cm² containing 1 m³ of liquid with a density of ρ = 1 kg/dm³. Calculate the pressure of the liquid acting on the bottom of the tank for g = 10 m/s²?
p = 1 bar
p = 100 kN/m²
p = 0.1 bar
p = 10 bar
A vertical pipe has a base area of 100 cm² containing 1 m³ of liquid with a density of ρ = 1 kg/dm³. Calculate the pressure of the liquid acting on the bottom of the tank for g = 10 m/s²?
p = 0.1 bar
p = 10 bar
p = 100 kN/m²
p = 1 bar
If a liquid flows in a pipe with a constant flow rate, how does the velocity change if the cross-section of the pipe doubles?
Decreases by 2 times
Increases by 2 times
Decreases by 4 times
Increases by 4 times
If a liquid flows in a pipe with a constant flow rate, how does the velocity change if the diameter of the pipe is reduced by half?
Increases by 4 times
Decreases by 4 times
Increases by 2 times
Decreases by 2 times
How does the speed change?
Increase 4 times
Decrease 4 times
Increase 2 times
Decrease 2 times
A hydraulic device has an input pressure of p1 = 10 bar, an output pressure of p2 = 1 bar, the flow rate supplied to the device is 20 liters/min, and the flow rate out of the device is 19.5 liters/min. Calculate the efficiency of the device.
η = 0.855
η = 0.9
η = 0.8
η = 0.7
When the speed increases by 2 times, how does the hydraulic pressure change?
Increase 4 times
Increase 2 times
Decrease by 2 times
Decrease by 4 times
When the power of the hydraulic motor remains unchanged but the speed of the motor decreases, then
The torque on the motor shaft can increase or decrease depending on the external load
The torque on the motor shaft increases
The torque on the motor shaft remains unchanged
The torque on the motor shaft also decreases
Hydraulic transmission...
Can only transmit small power
Can only transmit medium power
Can only transmit large and extremely large power
Can transmit power from small to large and extremely large
The advantages of hydraulic systems are:
Can transmit high power and large force; Adjust working speed finely and continuously; Compact structure, the position of the leading and driven elements is independent of each other.
Can reduce weight and size by choosing high hydraulic pressure; Can be used at high speeds without fear of strong impacts; Easy to convert the rotary motion of the motor into the linear motion of the actuator.
Easy to prevent overload thanks to safety valves; Easy to monitor and observe with pressure gauges; Simple automation.
All of the above
A type of oil with a specific gravity of 0.75 has a density of:
750 kg/m3
750 N/m3
750 * 9.81 N/m3
750 * 9.81 kg/m3
The compressibility factor of a liquid indicates:
Relative volume change when pressure changes by 1
What is the specific weight?
750 kg/m3
750 N/m3
750. 9.81 N/m3
750. 9.81 kg/m3
What does the compressibility coefficient of a liquid represent?
Relative volume change when pressure changes by 1
Volume change according to the temperature of the liquid
Work done when the relative volume change is 1
All 3 answers are correct
What is an ideal liquid?
All 3 answers are correct
Completely incompressible
Has absolute mobility
Has zero viscosity
What does Newton's law of internal friction express the relationship between?
Shear stress, strain rate, and viscosity
Normal stress, velocity, and temperature
Shear stress, temperature, viscosity, and pressure
Shear stress and strain rate
What is the unit of dynamic viscosity?
All 3 answers above are correct
Pa.s
N.s/m2
Poise
Which types of pumps can adjust flow rate when angular velocity remains unchanged?
Gear pump
Vane pump with 2 working volumes
Screw pump
None
What is the relationship between temperature and viscosity?
Viscosity increases with temperature
Viscosity decreases with temperature
Viscosity is independent of temperature
Which element is an actuator?
Hydraulic motor
Distribution valve
Hydraulic pump
Pipe
Which element is a control element?
Sensor
Hydraulic pump
Distribution valve
Hydraulic motor
The inlet of the hydraulic pump is 0.6m from the surface of the oil tank, and the specific weight of the oil is 0.86g/cm3. Calculate the static pressure at the pump inlet?
p = 5.062(N/m2)
p = 50(bar)
p = 50(N/m2)
p = 5.062(bar)
Which types of pumps cannot adjust flow rate when angular velocity remains unchanged?
What is the static pressure at the pump inlet?
p = 5,062(N/m2).
p = 50(bar)
p = 50(N/m2)
p = 5,062(bar)
Which types of pumps cannot adjust flow rate when angular velocity remains unchanged?
Gear pump
Vane pump with 2 working volumes
Screw pump
All of the above
Which types of pumps can adjust flow rate?
Gear pump
Screw pump
Vane pump with 2 working volumes
Axial piston pump
What is the function of an oil pump?
To convert mechanical energy into hydraulic oil energy
To convert hydraulic oil energy into mechanical energy
To convert mechanical energy into hydraulic oil energy or convert hydraulic oil energy into mechanical energy
To convert mechanical energy into hydraulic oil energy and convert hydraulic oil energy into mechanical energy
What is the function of a hydraulic motor?
To convert mechanical energy into hydraulic oil energy.
To convert hydraulic oil energy into mechanical energy.
To convert mechanical energy into hydraulic oil energy or convert hydraulic oil energy into mechanical energy
To convert mechanical energy into hydraulic oil energy and convert hydraulic oil energy into mechanical energy
What is the function of a reversible hydraulic machine?
To convert mechanical energy into hydraulic oil energy.
To convert hydraulic oil energy into mechanical energy.
To convert mechanical energy into hydraulic oil energy or convert hydraulic oil energy into mechanical energy
To convert mechanical energy into hydraulic oil energy and convert hydraulic oil energy into mechanical energy
Which of the following symbols represents a reversible hydraulic motor that can change flow rate?
Which of the following symbols represents a reversible oil pump that can change flow rate?
Which of the following symbols represents a reversible oil pump with adjustable flow?
A.
B.
C.
D.
Which of the following symbols represents a reversible hydraulic machine?
A.
B.
C.
D.
Which types of oil pumps can have adjustable flow?
Gear pump, vane pump
Gear pump, piston pump
Screw pump, piston pump
Vane pump, piston pump
Which oil pump has the highest working pressure?
Gear pump
Piston pump
Screw pump
Vane pump
What is the function of hydraulic accumulator?
Store energy and release energy
Reduce pump power
Equalize pump flow, end the working cycle in case of failure or repair
All of the above
Which of the following statements is accurate?
Vane pump with adjustable working volume can adjust flow.
Vane pump can adjust flow.
Vane pump with multiple working volumes can adjust flow.
How to adjust the flow of a vane pump?
Change the length of the vane.
Change the width of the vane.
Change the eccentricity between rotor and stator.
How to adjust the flow of a piston pump with an inclined shaft?
Change the angle of the pump shaft.
Change the angle of the pump shaft combined with the angle of the inclined plate.
Change the angle of the inclined plate.
How to adjust the flow of a piston pump with an inclined plate?
Change the angle of the pump shaft.
Change the angle of the pump shaft combined with the angle of the inclined plate.
Change the angle of the inclined plate.
How to adjust the flow of a piston pump with a wobble plate?
Change the angle of the pump shaft.
Change the angle of the wobble plate.
What is the adjustment method for the axial piston pump flow rate?
Change the tilt angle of the pump shaft.
Change the tilt angle of the pump shaft combined with the tilt angle of the wobble plate.
Change the tilt angle of the wobble plate.
What is the main task of the oil tank?
Provide oil for the closed circuit working system (supply and receive flowing oil).
Dissipate heat generated during the oil pumping process.
Sediment the sludge during operation and separate water.
All of the above.
Which of the following symbols represents the oil tank?
Which of the following symbols represents a single-acting cylinder?
What is the maximum particle size that a coarse filter can filter?
Up to 0.1mm.
Up to 0.15mm.
Up to 0.25mm.
What is the maximum particle size that a medium filter can filter?
Up to 0.015mm.
Up to 0.01mm.
Up to 0.02mm.
What is the maximum particle size that a fine filter can filter?
Up to 0.005mm.
Up to 0.001mm.
Up to 0.01mm.
What is the maximum particle size that a super fine filter can filter?
Up to 0.005mm.
Up to 0.001mm.
Up to 0.002mm.
Which of the following symbols represents a filter?
What is the purpose of the extraction tank in the hydraulic system?
Prepare a ready oil flow for immediate maximum demand; Act on components that only need pressure and a small flow.
Balance the oil leakage and the volume change due to temperature and pressure fluctuations.
Prepare energy in case of emergency; Dampen when there are pressure and flow fluctuations.
All of the above.
What is the volume of a hydraulic motor in one rotation if it is 300cm³ and rotates at a speed of 200 revolutions per minute?
A hydraulic motor has a volume of 300cm3 per revolution and rotates at a speed of 200 revolutions per minute. The inlet pressure is 210 bar, and the outlet pressure is 10 bar. Calculate the torque on the motor shaft with a mechanical efficiency of 0.95?
M = 955(Nm)
M = 907(N.m)
M = 500(Nm)
M = 1005(Nm)
A hydraulic motor has a volume of 300cm3 per revolution and rotates at a speed of 200 revolutions per minute. The inlet pressure is 210 bar, and the outlet pressure is 10 bar. Calculate the flow rate supplied to the motor given that the volumetric efficiency is 0.9?
Q = 66.7 (lit/min)
60 (lit/min)
Q = 50 (lit/min)
70 (lit/min)
A hydraulic pump has a flow rate of 20lit/min and a pressure of 150bar. Calculate the power of the pump?
N = 5.6 (kW)
N = 5 (kW)
N = 7.5 (kW)
N = 4.5 (kW)
A hydraulic pump has a volume of 13cm3 per revolution with n = 1440 revolutions per minute. Calculate the flow rate?
Q = 16.5 (lit/min)
Q = 22.5 (lit/min)
Q = 15 (lit/min)
Q = 18.72 (lit/min)
A hydraulic pump has a volume of 13cm3 per revolution with n = 1000 revolutions per minute and a volumetric efficiency of 0.9. Calculate the flow rate?
Q = 16.5 (lit/min)
Q = 11.7 (lit/min)
Q = 22.5 (lit/min)
Q = 15 (lit/min)
A hydraulic motor has a volume of 20cm3 per revolution with n = 1500 revolutions per minute and a volumetric efficiency of 0.8. Calculate the actual flow rate supplied to the motor?
Q = 34 (lit/min)
Q = 38 (lit/min)
Q = 35 (lit/min)
Q = 37.5 (lit/min)
A axial piston pump with the following parameters: Number of pistons i = 7, area of each piston S = 2cm2, cylinder arrangement diameter D = 180mm, rotating at a speed of 100 (revolutions/min), and the angle of inclination of the disk is 30 degrees. Calculate the flow rate of the pump?
Q = 14 (lit/min)
Q = 14.5 (lit/min)
What is the flow rate of the pump if the diameter is D = 180mm, rotating at a speed of 100 (revolutions/min), and the angle of the disk is 30 degrees?
Q = 14 (liters/minute).
Q = 14.5 (liters/minute)
Q = 24 (liters/minute).
Q = 2 (liters/minute).
What is the efficiency of the hydraulic system if the volumetric efficiency is 0.8, hydraulic efficiency is 0.9, and mechanical efficiency is 0.95?
η = 0.9
η = 0.8
η = 0.7
η = 0.684
Calculate the power of the motor driving the pump if a hydraulic pump provides 12 liters of liquid per minute at a pressure of 200 bar and the total loss is 0.6.
N = 4(kW)
N = 6(kW)
N = 2(kW)
N = 6.67(kW.)
What is the unit flow rate if the oil engine has a flow rate Q = 100(liters/minute) and volumetric efficiency is 0.85, rotating at a speed of 1000 (revolutions/min)?
q = 85(cm³/revolution).
q = 0.85(cm³/revolution)
q = 100(cm³/revolution)
q = 117(cm³/revolution)
What is the actual output power of an oil engine with a volumetric efficiency of 0.9, mechanical efficiency of 0.95, and actual flow rate of 66.7(l/min)?
N = 22.3(kW.)
N = 17.7(kW.)
N = 20(kW.)
N = 19(kW)
Calculate the actual flow rate of the fluid supplied to the engine if the oil engine has a volume per revolution of 300cm³ and a rotation speed of 200 (revolutions/min), with a volumetric efficiency of 0.9.
Q = 60 (liters/minute)
Q = 54 (liters/minute)
Q = 66.7 (liters/minute.)
Q = 6 (dm/minute)
What is the efficiency of the hydraulic device if the inlet pressure p1 = 10 bar, outlet pressure p2 = 1 bar, the flow rate supplied to the device is 20 liters/minute, and the flow rate out of the device is 19.5 liters/minute?
η = 0.9
η = 0.8
η = 0.95
η = 0.855.
Which of the following symbols represents a double-acting cylinder?
A.
B.
C.
Which of the following is a two-way actuator?
A
B
C
Which of the following is a cylinder with a tube?
A
B
C
D
Which of the following is a two-way actuator with damping?
A
B
C
D
Where can a filter be installed in a hydraulic system?
At the suction line
At the compression line
At the discharge line
All of the above
What is the torque generated by a hydraulic motor with a flow rate of Q = 60 liters/min, speed n = 200 rpm, and pressure 120 bar?
M = 144.5 (Nm)
M = 573 (N.m)
M = 72.5 (Nm)
M = 127.5 (Nm)
Calculate the theoretical flow rate of a hydraulic motor with a displacement of 20 cm³/rev and n = 1500 rpm.
Q = 30 (liters/min)
Q = 35.6 (liters/min)
Q = 25.5 (liters/min)
Q = 15.5 (liters/min)
What is the actual flow rate of a pump with a flow rate of Q = 20 (liters/min) and a volumetric efficiency of 0.8?
Q = 16 (liters)
Q = 16 (liters/min)
Q = 25 (liters)
Q = 25 (liters/min)
What is the volume of oil transported by a pump with a flow rate of Q = 50 (liters/min) and a volumetric efficiency of 0.8 in 5 minutes?
V = 62.5 (m³/min)
V = 200 (m³/min)
V = 200 (m³)
V = 62.5 (m³)
What principle does a hydraulic pump operate on?
Displacement (volume change)
Centrifugal
Deformation
All of the above
Which of the following is a hydraulic pump?
A
B
C
D
Which of the following is a hydraulic motor?
A
B
C
D
Which of the following is a reversible hydraulic pump with a constant flow rate?
A
B
C
D
Which of the following symbols represents a diesel engine?
A
B
C
D
Which of the following symbols represents a non-variable flow reversible oil pump?
A
B
C
D
Choose the correct statement about hydrostatic pressure.
Hydrostatic pressure is a vector quantity but has scalar characteristics.
Hydrostatic pressure can have a value different from 0.
Hydrostatic pressure is a scalar quantity.
Hydrostatic pressure at a point varies in different directions.
The absolute pressure of a liquid is:
Perpendicular and directed towards the acting surface.
Perpendicular to the acting surface and horizontal.
Zero at the surface in contact with the atmosphere.
Always directed vertically.
In hydraulic and pneumatic transmission, what principle does the pump operate on?
Changing the volume of working chambers.
All 3 remaining principles.
Creating centrifugal force.
Creating vacuum.
The power of a hydraulic pump is expressed through which of the following quantities?
There is no correct answer.
Liquid pressure.
Liquid flow rate.
Liquid velocity.
The power of a hydraulic pump is expressed through which of the following quantities?
Pressure and flow rate created by the pump.
Pressure created by the pump.
Rotational speed of the pump.
Torque of the pump.
The power of a hydraulic cylinder is expressed through which of the following quantities?
Velocity and applied force.
Velocity.
Force.
There is no correct answer.
Calculate the flow rate of an oil pump given the following parameters: n = 1000 rpm, unit flow q = 10 cm³/rev, volumetric efficiency η = 0.9.
Q = 9 liters/minute.
Q = 19 liters/minute.
Q = 15 liters/minute.
Q = 12 liters/minute.
Calculate the flow rate of an oil pump given the following parameters: n = 800 rpm, unit flow q = 5 cm³.
Calculate the flow rate of a oil pump given the parameters of the pump as follows: n = 800 rev/min, unit flow q = 5 cm³/rev, volume loss η = 0.7
Q = 2.8 liters/min
Q = 17.2 liters/min
Q = 16.7 liters/min
Q = 11 liters/min
Calculate the flow rate of a oil pump given the parameters of the pump as follows: n = 750 rev/min, unit flow q = 25 cm³/rev, volume loss η = 0.95
Q = 17.8 liters/min
Q = 14.5 liters/min
Q = 13.2 liters/min
Q = 16.6 liters/min
For a system with 2 cylinders with parameters as shown, calculate the force acting on cylinder 1 to balance the system F2 = 100N, A2 = 10 cm², A1 = 4 cm²
F1 = 10 N
F1 = 100 N
F1 = 40 N
F1 = 60 N
For a system with 2 cylinders with parameters as shown, calculate the force acting on cylinder 1 to balance the system F2 = 30N, A2 = 60 cm², A1 = 5 cm²
F1 = 2.5 N
F1 = 4.5 N
F1 = 1.5 N
F1 = 8.5 N
For a system with 2 cylinders with parameters as shown, calculate the force acting on cylinder 1 to balance the system F2 = 50N, A2 = 4 cm², A1 = 1 cm²
F1 = 7.5 N
F1 = 8.5 N
F1 = 6.5 N
F1 = 4.5 N
For a system with 2 cylinders with parameters as shown, calculate the force acting on cylinder 1 to balance the system F2 = 70N, A2 = 35 cm², A1 = 5 cm²
F1 = 10 N
F1 = 100 N
F1 = 40 N
F1 = 60 N
For a system with 2 cylinders with parameters as shown, calculate the force acting on cylinder 1 to balance the system F2 = 100N, A2 = 10 cm², A1 = 4 cm²
F1 = 8 N
F1 = 100 N
F1 = 10 N
F1 = 6 N
